Front Panel Components

Product Information

Dimensions (HWD)	1.51" x 5.55" x 5.45" (3.84 cm x 14.10 cm x 13.84 cm)

Enclosure	Non-glare, high-impact black matte plastic

Power Consumption
Baseline draw	• 90 mA @ 12 VDC (min)
With all 8 relays On	• 170 mA @ 12 VDC (max)

Front Panel Components

AXlink Status indicator	AXlink LED (green and blinks to indicate AXlink communication activity and
	power:
	• Full-Off indicates no power is being received or the controller is not
	functioning properly.
	• One blink per second indicates power is active and AXlink communication is
	functioning.
	• Full-On indicates there is no AXlink control or activity, but power is On.

Device DIP switch	An eight-position DIP switch is used to set the device number for the
	AXB-REL8.

Relay LEDs 1-8 (Red)	Illuminate when associated relay is closed. Relay LED's should match panel
	control function.

Rear Panel Components

AXlink connector	Four-pin captive wire receives power and information via the AXlink bus and
	AXlink system controller.

Relay contacts	Eight (normally -open) isolated two-pin relay contacts 1 A @ 28 VAC or VDC:
	• Relays 1-4 can share a common if use jumper"A" pins with a tab strip
	• Relays 5-8 use discrete commons (wire commons individually)

	2	AXB-REL8 Axcess Relay Controller