Radio Shack 64, 65 owner manual VCR Setup, Setting the VCR’S Output Channel Switch, Remote Control

Page 13

16-634.fm Page 13 Tuesday, July 20, 1999 5:37 PM

VCR SETUP

SETTING THE VCR’S OUTPUT CHANNEL SWITCH

If you connected the VCR’s OUT TO TV termi- nal to a TV or another VCR, set 3-CH-4on the back of the VCR to 3 or 4, whichever is not an active channel in your area.

When VCR appears on the display, the VCR sends the signal from the video source con- nected to its IN FROM ANT. or R-AUDIO-L IN 1/ VIDEO IN 1 (or AV2 on the front panel) terminals to the TV on the channel you selected.

Note: Setting 3-CH-4 has no effect on the TV when the VCR is off or if you connected a TV with separate audio/video input jacks to the VCR’s R-AUDIO-L/VIDEO OUT jacks.

REMOTE CONTROL

Installing Batteries

The remote control requires two AA batteries (not supplied). For the longest operation and best performance, we recommend alkaline bat- teries (such as RadioShack Cat. No. 23-557).

Cautions:

2.Put fresh batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside.

3. Replace the cover.

Note: When the remote control stops working or operates poorly, replace both batteries.

Cautions:

•Never leave dead or weak batteries in the remote control. Batteries can leak chemi- cals that can damage your remote control.

•Dispose of dead batteries promptly and properly; do not bury or burn them.

Using the Remote Control

•Use only fresh batteries of the required size and recommended type.

•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

1.Press the tab on the battery compartment cover and lift off the cover in the direction of the arrow.

To use the remote control, aim it at the front of the VCR and press the desired function but- tons.

Tab

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model 64/Model Important Safety Instructions Fm Page 3 Tuesday, July 20, 1999 537 PM Tuning FeaturesRECORDING/PLAYBACK Tape Control Other FeaturesContents Recording Speeds/Tape Selection Using this Manual Supplied AccessoriesBefore YOU Begin Moisture CondensationBasic Connections InstallationCatv Receiver Home Theater ConnectionsCamcorder Connections Connecting PowerSetting the VCR’S Output Channel Switch VCR SetupRemote Control Installing BatteriesSetting the On-Screen Language/ Channels/Clock Initial SET UPManually Setting the Clock Turning On Auto Clock Set Adding/Erasing ChannelsReprogramming Tuner Memory Changing the On-Screen Language Resetting the VCR’s Memory Turning the Error Beep ON/OFFCable BOX Code Brand Fm Page 20 Tuesday, July 20, 1999 537 PM Using the VCR’s Tuner Using the TV’s TunerOperation Watching TVBlank Loading a Video Tape Viewing a Video TapePlaying a Video Tape Special Functions Function IndicatorsSpecial Displays Blue Screen DisplayREAL-TIME Counter Tape Motion ControlsSetting Up Commercial Advance Marking Using the Zero Search FunctionSelecting a Commercial Advance Tape Playback Option Questions and Answers about Commercial AdvanceSKIPPING/SELECTING Previews Model 65 only Direct Access Index Search Using Index SearchRepeat Play Program Index Search Timer Recording OnlyIndex Scan Tracking Time StampVCR Lock Recording SPEEDS/TAPE Selection RecordingErase Protection Immediate Recording Selecting the Signal to RecordRecording a Program As You Watch It Automatic Timer Recording Setting a Timer Checking/Changing Timers Monitoring an Automatic Timer RecordingDubbing Clearing a TimerAUDIO-ONLY Recording Additional Information TroubleshootingFm Page 41 Tuesday, July 20, 1999 537 PM Care and Maintenance Servicing Your VCR Cleaning the Video HeadsStoring Your Video Cassettes Specifications Frequency Response Regular Audio 100 Hz-8 kHz Fm Page 46 Tuesday, July 20, 1999 537 PM Fm Page 47 Tuesday, July 20, 1999 537 PM RadioShack
Top Page Image Contents