3.Repeatedly press 
until the desired lan- guage appears next to the fifth item.
4.When you finish, press MENU/ACTION.
Resetting the VCR’s Memory
You can erase all settings (including the time and date, local channels, and programmed events) at any time. Eject any loaded tape, then hold down PLAY and CHANNEL s on the VCR for about 5 seconds until it turns itself off. All settings are cleared.
The next time you turn on the VCR, it performs its initial setup sequence. See “Setting the On- Screen Language/Channels/Clock” on Page 14.
TURNING THE ERROR BEEP ON/OFF
Your VCR is preset to sound a beep through your TV when you enter invalid or incomplete information. However, you can turn the beep off or on at any time.
Follow these steps to turn off the beep.
1.Press MENU/ACTION to display the main menu.
2.If necessary, repeatedly press 
or 
to highlight SET UP VCR, then press 
.
3.Repeatedly press 
or 
to highlight
BEEPER. Then press 
to select OFF.
CR
: ON
: ON ACK : ON
KEY
4. Press MENU/ACTION twice to exit.
To turn on the beep again, repeat these steps and select ON in Step 3.
18
USING THE VCR REMOTE CONTROL WITH YOUR TV AND CABLE BOX OR SATELLITE RECEIVER
In addition to controlling your VCR, the remote control can operate the basic functions of your TV and cable box or
Note: Some brands have more than one code listed in the charts. If a code does not work with your TV, cable box, or
1.Find the code for your TV and cable box or
TV BRAND | CODE |
|
|
|
|
Fisher | 10 |
|
|
GE | 03 |
|
|
Goldstar | 15, 16, 17 |
|
|
Hitachi | 12 |
|
|
JVC | 11 |
|
|
Magnavox | 05 |
|
|
Mitsubishi | 07, 13 |
|
|
Panasonic | 01, 02 |
|
|
Quasar | 01, 02 |
|
|
RadioShack | 01, 02, 15, 16, 17 |
|
|
RCA | 03 |
|
|
Realistic | 01, 02, 15, 16, 17 |
|
|
Samsung | 14 |
|
|
Sanyo | 10 |
|
|
Sharp | 06, 07 |
|
|
Sony | 08 |
|
|
Sylvania | 05 |
|
|
Toshiba | 09 |
|
|
Zenith | 04 |
|
|