Setting a Timer
Note: If you use a TV/monitor that is connected to the VCR’s
1.Turn on the VCR and the TV.
2.Set the TV to the same channel as
3.Repeatedly press TV/VCR until VCR appears.
4.Set the audio recording mode to the desired setting. See “Receiving/Recording Stereo/SAP Broadcasts” on Page 34.
5.Load a blank cassette, or one that you want to record over, into the VCR.
6.Press PROG. You see:
ART | STOP | CH |
N/A |
| SLP |
ART DATE
KEY
KEY
ROG KEY
Or, if you have already entered timer set- tings, the current settings for up to the first four broadcasts appear.
Note: If the clock is not set, PLEASE SET CLOCK BEFORE PROGRAMMING ap- pears, then the clock setting screen ap- pears. Set the clock as described in “Manu- ally Setting the Clock” on Page 15, then continue with Step 7.
36
7.Repeatedly press 
or 
to select an empty timer number, then press 
. You see:
ART | STOP | CH |
N/A |
| SLP |
ART DATE
KEY
KEY
ROG KEY
8.Repeatedly press 
or 
to select the date when you want to record.
To record a broadcast at the same time on the same day every week, press either but- ton until WEEKLY flashes and the desired day of the week appears.
ART | STOP | CH |
N/A |
| SLP |
ART DATE
KEY
KEY
ROG KEY
To record a broadcast at the same time Monday through Friday, press either button until DAILY flashes and
ART | STOP | CH |
N/A |
| SLP |
ART DATE
KEY
KEY
ROG KEY
To record a broadcast at a set time today, press either button until today’s date flashes and TODAY appears.
ART | STOP | CH |
N/A |
| SLP |
ART DATE
KEY
KEY
ROG KEY