Radio Shack 66 owner manual Manually Setting the Clock, 1200PM

16-635.fm Page 19 Wednesday, July 21, 1999 9:03 AM

Instead, you see:

NO CH FOUND

PLEASE CHECK ANTENNA

CABLE CONNECTION THEN

PUSH VCR CH UP KEY AGAIN

Manually Setting the Clock

Follow these steps to manually set the clock if EDS is not available in your area, if you do not want the VCR to search for an EDS signal, or if you skipped tuner programming.

Notes:

•The clock must be accurately set for proper automatic timer recording. We suggest you refer to a radio station or time/temperature service for the correct time.

•If you do not press a button within 5 min- utes in Steps 2–9, the clock is not set. Start again from Step 1.

1.Press MENU/ACTION to display the main menu.

---------

RE

NEL

UE: ENGL I SH

Y

KEY

Note: To exit the programming mode at any time, press MENU/ACTION.

2.Repeatedly press or to highlight SET CLOCK, then press .

3.Repeatedly press or to highlight MANUAL, then press .

K ------

CK SET

Y

KEY

4.Repeatedly press or to select the correct month, then press .

K ------

:

DST : ON

--------

Y

KEY

5.Repeat Step 4 to select the correct date, year, and hour, then press .

6.Repeatedly press or to select a minute that is 1 or 2 minutes after the current time, then press . (For example, if it is 42 minutes past the hour right now, enter 43 minutes.) This gives you time to complete this procedure before starting the clock.

Note: Your VCR uses a 12-hour clock. Be sure you correctly set AM or PM.

7.Repeatedly press or to set DST (daylight saving time) to ON or OFF.

When you set DST to ON, the VCR auto- matically adds 1 hour on the first Sunday in April, and subtracts 1 hour on the last Sun- day in October.

8.Press . SET COMPLETED appears.

K ------

12:00PM

DST : ON

--------

KEY

9.Review the information you entered.

If the information is not correct, move the cursor to the incorrect entry by repeatedly

pressing (marked to the left of REW on the remote control) or , then enter the correct information.

19