Radio Shack 66 owner manual Dubbing, Clearing a Timer

Page 46

16-635.fm Page 46 Wednesday, July 21, 1999 9:03 AM

4. Repeatedly press

or

to select

THEN STOP KEY appears if you are

TIMER PROGRAM,

then press

. The

watching the signal from the VCR.

first four timer settings appear.

2. Within 10 seconds, press POWER

then

 

 

press . TIMER disappears.

 

CH SPD

5.Repeatedly press or to select the setting you want to change, then press .

6.Follow Steps 8–13 under “Setting a Timer” on Page 44 to correct the selected setting.

7.When you finish, press PROG again, then turn off the VCR.

Clearing a Timer

If the timer recording has not yet started:

1.Turn on the TV and set it to the same chan- nel as 3-CH-4on the back of the VCR.

Note: If you are using a TV/monitor that is connected to the VCR’s R-AUDIO-L/VIDEO OUT jacks, set the TV/monitor to its video mode.

2.Turn on the VCR and repeatedly press TV/ VCR until VCR appears.

3.Press PROG. You see the set program menu.

4.Repeatedly press or to select

TIMER PROGRAM, then press . The first four timer settings appear.

5.Repeatedly press or to select the setting you want to clear, then press ADD/ DLT.

6.When you finish clearing the timer, press

PROG.

Turn off the VCR if you still have at least one timer setting entered.

If a timer recording is in progress:

1.Press POWER to stop timer recording. TO

CANCEL TIMER REC PUSH POWER

46

DUBBING

The process of recording from one audio/video device to another is called dubbing.

An audio/video device where a signal origi- nates is called the dubbing source. You can use another VCR, camcorder, satellite receiv- er, or other device with A/V outputs as the dub- bing source, connect the dubbing source and the VCR, then use your VCR to record the sig- nal from the dubbing source. Or, you can use this VCR as the dubbing source for another VCR. See “Installation” on Page 9 for the vari- ous possible connections.

Note: Always use video-quality shielded ca- bles with phono-type connectors to connect the device to the VCR. Do not use standard audio patch cords.

Important: Most material performed in public, such as concerts, plays, and movies, or distrib- uted on prerecorded video tapes is copyright- ed. The unauthorized recording or duplication of copyrighted material is a violation of the copyright laws of most countries and such du- plication may result in fines, imprisonment, or both. Note, however, that in the United States, it is not a violation of U.S. copyright laws for a consumer to record a broadcast television pro- gram for private (in-home) viewing.

To dub a tape, start playback on the dubbing source first (see that device’s instructions) then start recording on the recording VCR.

Image 46
Contents Model Important Safety Instructions Product Tuning FeaturesRECORDING/PLAYBACK Other Features Tape ControlContents Blue Screen Display On-Screen Display Function Indicators Before YOU Begin Supplied AccessoriesUsing this Manual Moisture CondensationInstallation Basic ConnectionsFm Page 10 Wednesday, July 21, 1999 903 AM Home Theater Connections CatvConnecting Power Camcorder ConnectionsRemote Control VCR SetupSetting the VCR’S Output Channel Switch Installing BatteriesInitial SET UP Positioning the VCR and Cable BOX or Satellite ReceiverIf you selected VCR CABLE/DSS TV or VCR TV, you see If you selected CABLE/DSS BOX VCRSatellite Receiver Code Brand SET Proceeding appearsAlternate Setup You selected VCR CABLE/DSS TV orManually Setting the Clock 1200PMAdding/Erasing Channels Reprogramming Tuner MemoryCABLE/DSS BOX SET UP and press . You see Setting the Cable BoxTurning On Auto Clock Set Changing the On-Screen Language Mitsubishi Panasonic Quasar RadioShack 01, 02, 15, 16 Hitachi/Hughes 104 Magnavox/Uniden 105 106 Panasonic 109 Resetting the VCR’S Memory Turning the Error Beep ON/OFFOperation Using the TV’s TunerUsing the VCR’s Tuner Watching TVBlank Loading a Video Tape Viewing a Video TapeTape Motion Controls Playing a Video TapeREAL-TIME Counter Using the CounterUsing the Zero Search Function Freeze-Frame/Frame AdvanceTracking VCR LockSpecial Displays Function IndicatorsSpecial Functions Blue Screen DisplaySkipping Commercials Turning Commercial Advance Marking On/OffSelecting a Commercial Advance Tape Playback Option Questions and Answers about Commercial AdvanceSET UP Commercial ADV., then press Auto or ManualUsing Index Search SKIPPING/SELECTING PreviewsProgram Index Search Timer Recording only Direct Access Index SearchIndex Scan Repeat Play Time StampPress MENU/ACTION twice to exit Recording SPEEDS/TAPE Selection RecordingErase Protection Immediate Recording Selecting the Signal to RecordRecording a Program as You Watch It Setting the VCR Plus+ Guide Channels Recording with VCR PLUS+Timer Recording with VCR Plus+ VCR Plus+ CH SET UP, then pressVCR Plus+ PROGRAM, then press MUSIC, COMEDY, MOVIE, SPORTS, orChecking/Changing VCR Plus+ RecordingPrograms Setting a Timer Monitoring an Automatic Timer Recording Checking/Changing TimersClearing a Timer DubbingAUDIO-ONLY Recording Troubleshooting Additional InformationFm Page 49 Wednesday, July 21, 1999 903 AM Care and Maintenance Servicing Your VCR Cleaning the Video HeadsStoring Your Video Cassettes Specifications Frequency Response, Regular Audio Hz-5 kHz Fm Page 54 Wednesday, July 21, 1999 903 AM Fm Page 55 Wednesday, July 21, 1999 903 AM RadioShack