RESETTING THE VCR’S
MEMORY
You can erase all settings (including the time, local channels, and programmed events) at any time. Eject any loaded tape, then hold down PLAY and CHANNEL s on the VCR for about 5 seconds until it turns itself off. All set- tings are cleared.
The next time you turn on the VCR, it performs its initial setup sequence. See “Setting the On- Screen Language/Connection Type/Remote Code/Clock” on Page 14.
TURNING THE ERROR BEEP
ON/OFF
Your VCR is preset to sound a beep through your TV when you enter invalid or incomplete information. However, you can turn the beep off or on at any time.
Follow these steps to turn off the beep.
1.Press MENU/ACTION to display the main menu.
2.If necessary, repeatedly press or to highlight SET UP VCR, then press
3.Repeatedly press PLAY or STOP to high- light BEEPER. Then press
OFF.
CR
:ON
:ON ACK : ON
KEY
4. Press MENU/ACTION twice to exit.
To turn the beep on again, repeat these steps and select ON in Step 3.
25