Follow these steps to assign any of the VCR’s 24 preset call letter combinations to stations in your area.
1.Press MENU/ACTION to display the main menu.
2.Repeatedly press 
or 
to highlight
SET UP CHANNEL, then press 
. You see:
NNEL
KEY
3.If necessary, repeatedly press 
or 
to highlight CHANNEL CAPTION, then press 
.
4.If necessary, repeatedly press 
or 
to highlight PRESET CAPTION, then press 
. You see:
T I ON
S | |
N | |
PN | |
O |
KEY
5.Press 
. The cursor moves to the dashes to the right of ABC.
6.Repeatedly press 
or 
to change the channel number. When the correct channel number for the ABC station in your area appears, press 
. The cursor moves to the next preset caption in sequence.
Note: Only the channel numbers stored in VCR tuner memory appear.
7.Press 
. The cursor moves to the dashes to the right of the selected preset caption.
Or, repeatedly press 
or 
to select another caption.
8.Repeat Steps 6 and 7 for each preset cap- tion you want to assign.
9.Review the entered information. If any number is not correct, repeatedly press 
, 
, 
, or 
to highlight the wrong entry. Use 
or 
to change the number, or ADD/DLT to delete the number.
10.Press MENU/ACTION four times to exit.
Follow these steps to manually create and as- sign up to 10 of your own call letter combina- tions.
1.Follow Steps
2.Repeatedly press 
or 
to highlight MANUAL CAPTION, then press 
. You see:
T I ON
APT I ON
KEY
3.Repeatedly press 
or 
to select the channel number, then press 
. The cur- sor moves to the dashes to the right of the channel number.
Note: Channels already assigned with pre- set call letters or deleted from the VCR’s
memory do not appear as you press 
or
.
4.Repeatedly press (or hold down) 
or 
to display the first character of the station’s
name. Then press 
to set the character.
The characters change in the following order.
A B C | Z | BLANK | — | & |
9 | 2 | 1 0 | / | ! |
Repeat this step to enter other characters (up to a total of four).
Note: To correct an error, press 
or 
to move the cursor to the right or left, then enter the correct character. To clear the call letters, press ADD/DLT.
27