When the information is correct and the time reaches the minute you set in Step 6, press MENU/ACTION twice. The time you set appears and the clock starts running.
Note: Seconds begin counting from 00 when you press MENU/ACTION the second time.
Adding/Erasing Channels
If you followed the steps listed in “Alternate Setup” on Page 18, we recommend you check the channels the VCR automatically stored. It might have stored distant, weak channels that you normally would not watch, or it might have missed channels you want to store.
If the tuner stores a channel that you do not want, repeatedly press (or hold down) CH s or t or use the remote control’s number buttons to tune to that channel, then press ADD/DLT. CHANNEL nn DELETED appears, and the un- wanted channel is erased from the tuner’s memory.
To add a channel, enter the desired channel number using the remote control’s number but- tons. Then press ADD/DLT. CHANNEL nn ADDED appears, and the channel is added to memory.
Follow these steps to reprogram the tuner.
1.Press MENU/ACTION to display the main menu.
Note: To exit the programming mode dur- ing Steps
2.Repeatedly press 
or 
to highlight SET UP CHANNEL, then press 
.
RE
EL
E: ENGL I SH
KEY
3.If necessary, repeatedly press 
or 
to highlight ANTENNA.
NNEL
ET UP
UP
KEY
4.Press 
again to select the antenna source (TV or CABLE).
5.Press 
or 
to highlight AUTO SET, then press 
. You see:
Reprogramming Tuner Memory
If you followed the steps listed in “Alternate Setup” on Page 18, you might want to repro- gram the VCR’s tuner memory if you later move or change from an antenna connection to a cable TV connection.
Note: You can also quickly erase all settings, in- cluding the time, local channels, and pro- grammed events, then reprogram the tuner’s memory. See “Resetting the VCR’s Memory” on Page 25.
20
AUTO SET
A CABLE
A CABLE
YOUR
THEN. . .
UP KEY
6.Set your cable box to the local PBS station, then press CH s. (If you do not have a cable box, simply press CH s.)
After you press CHs, CH AUTO SET PRO- CEEDING and the current channel number appear on the TV screen as the VCR scans through the channels and memorizes all active channels in your area.