Troubleshooting

15-1994.fm Page 47 Tuesday, February 29, 2000 2:04 PM

	Problem		Solution

The 6-in-One		Try all of the codes listed for your
does not operate		brand of device in the appropriate
your device.		“Manufacturer Codes” section (see
		“Setting Up Your Remote Control”
		on Page 7).
		If this does not work, try searching
		for your code (see “Searching for a
		Code” on Page 48).
		Make sure the device you are set-
		ting up can be operated with an
		infrared remote.

The 6-in-One is		Try all of the codes listed for your
not performing		brand of device in the appropriate
commands prop-		“Manufacturer Codes” section (see
erly.		“Setting Up Your Remote Control”
		on Page 7). Many set-up codes may
		allow some degree of operation.
		However, only one set-up code will
		work correctly with your device.

VCR not record-		As a safety feature on the 6-in-One,
ing.		you must press REC twice to begin
		recording.

CH +/– and LAST		Due to RCA design (1983–1987),
not working for		only the original remote will operate
your RCA TV.		these functions.

Problems chang-		If your original remote required an
ing channels.		ENTER keystroke when changing
		channels, press ENTER on the 6-in-
		One after you enter the channel
		number.

The red light		Press the appropriate device key
blinks when you		(CD, CBL/SAT, VCR, TV, AUX 1,
press a key but		AUX 2, PLUG ’N POWER) for the
you receive no		device you are trying to operate.
response from		Make sure you aim your 6-in-One at
your device.		your device and that you are within
		15 feet of the device before using
		your remote.


	Need help? Call 1-888-284-8735
		47

TROUBLESHOOTING