Note: If you are searching for a VCR, CD player, laser disc player, or DVD player code, insert a tape or disc and press PLAY instead of
POWER.
5. Press P within 10 seconds to save the code.
Notes:
•If you do not press P within 10 seconds, the remote control does not save the code. You must start again from Step 1.
•Because the
•If your device turns off during the search, but does not operate after you lock in the code, begin the search again, pausing longer between key presses.
Determining the 4-Digit Code
After you have set up your devices using the Code Search feature, you might need to find out which code is operating one of them. For example, to find out what
1.Turn on the TV and press TV.
2.Hold down P until the red light blinks twice.
3.Press 9 9 0. The red light blinks twice again.
4.Press 1, then count the number of times the red light blinks and write it down. This is the first digit of the
Note: If the red light does not blink, the digit is 0.
5.Repeat Step 4, pressing 2, 3, and 4, to see each additional digit.
Need help? Call
49