AUX 2, or PLUG ’N POWER), then hold down P until the red light blinks twice.
4.Enter the
For example, to replace a Panasonic TV’s remote control
When the red light blinks twice, the remote con- trol has accepted the code.
Note: If you enter an invalid code, the red light makes one long blink.
5.Point the
If the remote does not operate your device, try the other codes you wrote down in Step 1.
To Operate Your TV/VCR Combination
1.Refer to “TV/VCR Combinations” on Page 37 and write down the codes for your TV/VCR com- bination on the supplied label.
Notes:
•Some manufacturers have several codes listed. Try each until you find the right one. See “Searching for a Code” on Page 48 if you cannot find the correct code.
•Some TV/VCR combinations require a sec- ond code to control volume. If you cannot control volume, use one of the codes listed for your brand in “TV/VCR Combinations.”
2.Turn on your TV/VCR combination and insert a tape.
Need help? Call
8