Radio Shack Audio/ Video Remote Control Using the Sleep Function, Clearing Favorite Channel Scan

15-1994.fm Page 15 Tuesday, February 29, 2000 2:04 PM

nel list, stopping on each channel for about 3 seconds.

6.Press any key when you see a channel you want to watch. Scanning stops.

Note: If you do not program a favorite channel list, SCAN acts as a “channel surf” key. Each time you press SCAN, the 6-in-One repeatedly performs cy- cles through the channels, stopping on each for about 3 seconds.

Clearing Favorite Channel Scan

To change your favorite channel list, you must first clear the existing list. Hold down P until the red light blinks twice. Press 9 9 6, then hold down P until the red light blinks twice. The list is cleared.

USING THE SLEEP FUNCTION

To use the sleep timer built into your TV, cable con- verter, satellite system, or audio device, press SLEEP. Most sleep timers advance in increments of 10 or 15 minutes. For specific instructions on setting your device’s sleep timer, refer to the device’s own- er’s manual.

If your TV, cable or satellite system does not have a sleep timer, the 6-in-One has a built-in sleep timer that can perform the function.

1.Press the appropriate device key.

2.Press SLEEP to set the 6-in-One’s sleep timer for 15 minutes. The red light blinks once.

3.Each additional press of SLEEP adds 15 min- utes to the sleep timer, up to 60 minutes. The red light blinks twice when the sleep timer is set

Need help? Call 1-888-284-8735

15