Radio Shack Audio/ Video Remote Control Using PUNCH-THROUGH, Turning Punch-Through Off

15-1994.fm Page 11 Tuesday, February 29, 2000 2:04 PM

2.Press 992. The red light blinks twice.

3.Press TV.

4.Press AUX1. The red light blinks twice.

5.Program the converted device key (AUX1) with the code for the second TV. (See “Setting Up Your Remote Control” on Page 7.)

Repeat these steps for each key you want to convert. To convert a key back to its original function, repeat Steps 1–2, then press AUX1 twice.

USING PUNCH-THROUGH

Punch-Through lets you alternately control two differ- ent devices without pressing the device keys for each one.

For example, a TV is often the only device that uses the volume keys. With the 6-in-One programmed to punch-through to the TV, you can control the TV’s volume while the 6-in-One is in any device mode.

1.Hold down P until the red light blinks twice.

2.Press 9 9 3.

3.Press TV. When you press VCR (or another device key) and use your volume keys, the 6-in- One controls the volume through the TV instead of the VCR (or the other device).

Turning Punch-Through Off

1.Hold down P until the red light blinks twice.

2.Press 9 9 3.

Need help? Call 1-888-284-8735

11