Remote Control
VOLUME LOCK
Your remote’s Volume Lock is preset to ON, so the volume and mute keys only control the TV volume, no matter which device is selected. If your device (CBL, VCR or SAT) has volume keys, the remote will ignore them and control volume through your TV. If you want to control the volume of other devices through your TV, skip the next section.
Note: TV/VCR Combo devices do not use this feature.
If you want to control the volume through each of your devices, perform the following steps:
TURN OFF VOLUME LOCK
Volume Unlock – CBL/SAT
1.Press CBL/SAT key. The red light blinks one time.
2.Press P key. The red light blinks two times.
3.Press number 5 digit key. The red light blinks one time.
4.Press P key. The red light blinks 2 times.
Volume lock to CBL/SAT is now turned off. If you want to control volume through Cable/SAT, you must be in the Cable/SAT mode.
Volume Unlock – VCR
1.Press VCR key. The red light blinks one time.
2.Press P key. The red light blinks two times.
3.Press number 5 digit key. The red light blinks one time.
4.Press P key. The red light blinks two times.
Volume lock to VCR is now turned off. If you want to control volume through your VCR, you must be in the VCR mode.
Volume Unlock – DVD Player
1.Press DVD key. The red light blinks one time.
2.Press P key. The red light blinks two times.
3.Press number 5 digit key. The red light blinks one time.
4.Press P key. The red light blinks two times.
Volume lock to DVD is now turned off. If you want to control volume through your DVD, you must be in the DVD mode.
Volume Lock | 12 |