Remote Control
BACKLIGHT
•Press the LIGHT key to turn on the backlight. When the LIGHT key is pressed, the backlight is preset to stay on for 5 seconds.
•Each time any key is pressed, the 5 second timeout is reset. If no key is pressed for 5 seconds, the backlight will turn off.
•If the LIGHT key is pressed while the backlight is on, it will turn off.
The backlight on your remote can be set to turn on and stay on for up to 10 seconds. To change the backlight setting to a
1.Press any device key (TV, VCR, CBL/SAT or DVD). The red light blinks 1 time.
2.Press the P key. The red light blinks 2 times.
3.Press the number 9 digit key. The red light blinks 1 time.
4.Press the P key. The red light blinks 2 times. The backlight will now remain on for up to 10 seconds after the last key is pressed.
Repeat steps
FACTORY RESET
The Guide Remote* can be reset to the factory default settings. Once reset, all macros and setup devices revert to default settings and devices. To reset remote to factory settings, perform the following steps.
1.Press any device key. The red light blinks 1 time.
2.Press the P key. The red light blinks 2 times.
3.Press the number 8 digit key. The red light blinks 1 time.
4.Press and hold the P key for 3 seconds. The red light blinks 2 times.
19 | Backlight / Factory Reset |