Remote Control
TURN ON VOLUME LOCK
You can turn on or reset Volume Lock to control volume through your TV by performing the following steps:
Note: If no device is set up in the selected mode, the remote will
Volume Lock – Cable Converter or SAT/DSS Receiver
1.Press CBL/SAT key. The red light blinks one time.
2.Press P key. The red light blinks two times.
3.Press number 5 digit key. The red light blinks one time.
4.Press P key. The red light blinks one time.
Volume to cable converter or satellite receiver is now controlled through TV.
Volume Lock – VCR
1.Press VCR key. The red light blinks one time.
2.Press P key. The red light blinks two times.
3.Press number 5 digit key. The red light blinks one time.
4.Press P key. The red light blinks one time.
Volume to VCR is now controlled through TV.
Volume Lock – DVD Player
1.Press DVD key. The red light blinks one time.
2.Press P key. The red light blinks two times.
3.Press number 5 digit key. The red light blinks one time.
4.Press P key. The red light blinks one time.
Volume to DVD is now controlled through TV.
DVD/VCR KEYS
DVD/VCR (transport) keys that have no function in the current device
The default setting in the Guide Remote is for the transport keys to
the transport keys to the DVD player.
The transport keys will also
Transport keys will not
13 | Turn On Volume Lock |