Radio Shack 15-2130 Computer Requirements, Install USB Drivers, Install Remotelinker II* Software

Page 21

COMPUTER REQUIREMENTS

Minimum system requirements for software installation and use:

A PC running Windows 98SE / 1ME / 2000 / 2XP

Internet Explorer 5.0+, Netscape 4.0+ or AOL 5.0+ Browser

Note: Microsoft Internet Explorer 5.0 must be installed on your computer even if it is not your default browser, because RemoteLinker II uses resource files provided only with Internet Explorer.

An available USB Port.

A CD ROM Drive.

Minimum of 5 MB free hard disk space.

Minimum of 8 MB RAM.

Active connection to the Internet.

INSTALL USB DRIVERS

1.Connect the RemoteLinker II cable to your Guide Remote and to an available USB port on your computer.

2.Wait for your computer to finish installing the required drivers.

3.Disconnect the cable from the remote.

INSTALL REMOTELINKER II* SOFTWARE

1.IMPORTANT: Temporarily disable any anti-virus software running on your PC.

2.Insert the RemoteLinker II CD in your CD ROM drive. Follow the installation instructions on the computer screen.

3.When prompted, click on the option to install the RemoteLinker II icon to the desktop.

After successful installation, a RemoteLinker II icon will appear in the system tray. This is usually located in the lower right corner of your computers screen near the clock.

Note: 1 RemoteLinker II has been successfully tested on all of the above mentioned operating systems. This software was specifically designed to use USB drivers supplied by Microsoft in each operating system and does not install drivers for you. Reliability is assured if the following three conditions are met:

The system meets the minimum system requirements.

The operating system and all the USB drivers were properly installed without errors.

The systems anti-virus software was disabled during the RemoteLinker II software installation.

2Some computers require a shutdown and restart to complete installation of software. Please follow your systems instructions if it prompts you to perform a shutdown and restart.

Computer Requirements

20

Image 21
Contents Guide Remote Table of Contents Table of Contents Introduction FeaturesKEY Layout Basic KEY Functions Mode KEY Functions Install Batteries Battery SaverAdjust Contrast Remote Control Remote SetupProgram Setup Codes Auto Code Search Manual Code SearchView Device Codes Viewing CodesReassigning Device Keys Recording Macro Programming MacrosPlaying Macro PUNCH-THROUGHTurn OFF Volume Lock Volume LockVolume Unlock CBL/SAT Volume Unlock VCRVolume Lock Cable Converter or SAT/DSS Receiver Turn on Volume LockVolume Lock VCR Volume Lock DVD PlayerPRIORITY-PRESS KEY Class PRIORITY-PRESSPRIORITY-PRESS KEY Class Table Channel KEY PRIORITY-PRESS Turn on Power KEY PRIORITY-PRESSTransport Keys PRIORITY-PRESS Volume KEY PRIORITY-PRESSTurn on Menu KEY PRIORITY-PRESS Menu Key Priority-Press SetupPUNCH-THROUGH VS Priority Press Toggle PUNCH-THROUGH and PRIORITY-PRESSBacklight Factory ResetInstall USB Drivers Install Remotelinker II* SoftwareComputer Requirements Activating Guide Activating GuideFirst-time Users Only Enter User Profile InformationSelect Guide Lineup Select Channel LineupCheck Email Download TV Listings Using the GuideUpdating TV Listings Navigating Guide ScreenAccessing Guide Screens Using Guide KEYTitle Screen MANUFACTURERS’ Codes Manufacturers’ CodesBrand TV Codes Fortress Loewe Philips Sony Cable Codes Brand Cable Codes Skycable Satellite Codes VCR Codes Brand VCR Codes Marta Radix Unitech DVD Codes Brand DVD Codes Video on Demand Codes Devices do not respond to commands TroubleshootingWhy can I not get a full seven-day Guide in my remote? How often should I sync my remote to update my TV Listings?Will the Guide Remote work with my cable system? How do I update my email address? Specifications SpecificationsLimited Ninety-Day Warranty Warranty