Williams Sound model wir 240/250 manual TX240 Transmitter Rear View, ❺ TV Microphone

Page 7

TX240 Transmitter (Rear View)

❹

❶ ❷

❸

❺TV Microphone

If an RCA connection is unavailable, use the

provided TV microphone to pickup the sound source directly from the TV loud speaker as shown on left.

Step 1: Connect the Transmitter Power Supply

Plug the Power Supply cord into the “DC 12V” jack on the back of the TX240. Then plug the Power Supply into an AC outlet. When the receiver is placed into the charging cradle built into the top of the transmitter, the center charging indicator on the front of the TX240 will turn on. When the spare battery is plugged into the left or right battery charging port on the transmitter, the corresponding charge indicator light will turn on.

Step 2: Connect the Transmitter to the Audio Source

Use the supplied red and white RCA audio cables to connect the TX240 Transmitter directly to the TV, VCR, or stereo “AUDIO OUT” jacks. If your television does not have “AUDIO OUT” jacks, you will need use the supplied TV microphone. See page 9 for TV microphone instructions.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual and User Guide Contents System Components System OverviewTo protect your hearing and the hearing of others Safety InformationRecycling Instructions Pacemaker SafetySetting up the TX240 Transmitter Connect the Transmitter to the Audio Source Connect the Transmitter Power SupplyTX240 Transmitter Rear View ❺ TV MicrophoneSelect Stereo or Mono Operation StepMHz Mono Operation Additional Receiver Adjustments Setting up the RX240 ReceiverInstall the Receiver Batteries Using the WIR RX240 ReceiverRX240 Receiver Using the WIR RX250 Receiver Setting up the RX250 Neckloop ReceiverTo use the Receiver RX250 Receiver If the system does not seem to be functioning Case of DifficultyLimited Warranty Page WIR 240, WIR System SpecificationsWIR TX240 Transmitter WIR RX250 Receiver WIR RX240 ReceiverPage Williams Sound MAN 147E
Top Page Image Contents