Compatible with:
RX240
RX250
2.3 MHz (MONO) OPERATION:
Connect the LEFT RCA plug from the TV or VCR audio output into the LEFT RCA jack on the TX240 Transmitter ❸ (the right jack should be left unplugged). Next, slide the stereo/ mono switch to the “O” mono position ➋. The transmitter is now set for 2.3 MHz operation.
Compatible with:
RX240
2.8 MHz (MONO) OPERATION:
Connect the LEFT RCA plug from the TV or VCR speaker output into the RIGHT RCA jack on the TX240 Transmitter ❸ (the left jack should be left unplugged). Next, slide the stereo/ mono switch ➋ to the “O” mono position. The transmitter is now set for 2.8 MHz operation.
RX250
Step 3: (continued)
If an RCA connection is unavailable, use the provided TV MICROPHONE
❺to pickup the desired sound source. Plug in the microphone into the Mic Jack on the rear of the TX240 Transmitter ❹. Use the velcro strip supplied to attach the microphone near the loudspeaker ❹ of your TV or stereo.
The microphone will allow you to play the TV at lower volume for other listeners and will pick up other important sounds like the telephone or doorbell ringing.
9