Winegard SK-3003 operation manual Winegard Company Power on, Connecting To Antenna, Directv Triple

Congratulations!

You have selected the Winegard® TRAV’LER Automatic Multi-Satellite TV Antenna. The TRAV’LER will deliver the ability to view up to five satellites at the same time with unmatched signal strength, the lowest travel height on the market, maximum HD capabilities and easy to use functionality – just like you get at home. This manual provides important information on the installation and operation of your TRAV’LER Interface Box. Please take time to read the manual in it’s entirety before installing or oper- ating your antenna.

Icons appearing in the manual are used for important information and helpful tips.

Alert indicates important information regarding product use, product specifications or procedures.

Operation

The TRAV’LER offers a simple one button operation that is also protected from accidental searches by a careful delay. Simply pressing the [Power] button will not start a search.

To start a search:

Press and Hold [Power] for two seconds or until the TRAV’LER interface displays “POWER ON”.

WINEGARD COMPANY

POWER ON

Now the power is ON and the button may be released.

Important tip offers helpful suggestions or refers you to a related topic in the manual.

For Winegard Warranty Information: Att: Technical Services Winegard Company 3000 Kirkwood St. Burlington, IA 52601 800-788-4417 Fax: 319-754-0715

Disclaimer Although every effort has been made to insure the information in this manual is correct and complete, no company shall be held liable for any errors or omissions in this manual. All information contained in this manual is subject to change without notice. No warranty of any kind is made with regard to the information included in this manual. The Satellite Interface is designed specifically for use with motorized recreational vehicles and information contained herein is provided for that purpose only.

Trademarks *Winegard, TRAV’LER is a trademark of Winegard Company. DIRECTV is a registered trademark of DIRECTV, Inc., a unit of Hughes Electronics Corp. All trademarks contained in this manual are property of their respective owners. Reference made to products or services provided by companies, other than Winegard Company, does not represent any endorsement of those products or services.

CONNECTING

TO ANTENNA

Once the power is on, the TRAV’LER interface will try to determine the type of dish that it is working with. The TRAV’LER Interface will display the type of satellite dish on the top line and the action it is taking on the bottom.

See below.	DIRECTV USERS
	DIRECTV TRIPLE
	READY MULTI-SAT

The TRAV’LER will enter the search mode as part of its normal operation. The first part of the search is for the TRAV’LER to find its “Home” position. Once it finds it home position it will begin to look for a satellite.

DIRECTV TRIPLE

HOME EL

DIRECTV TRIPLE

HOME AZ/SK

When the TRAV’LER finds a satellite it will fine tune or “Peak” on the signal and determine which of the satellites it has found. Once the TRAV’LER knows which satellite it has found, it can move directly to the correct satellite(s).

The TRAV’LER in its automatic search mode will lock onto three different satellites. As it finishes its search, the TRAV’LER will display an “*” for each of the satellites it found. See below.

!To order receivers or programming please call the Winegard receiver hotline: 1-(866) 609-9374.

Rev. 5/10

2 OPERATION

DIRECTV TRIPLE

*101	*110	*119
Now you are ready to watch TV.
OPERATION	3