OPERATION
Tuning in (continued)
. Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO-
. SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.
To preset channels (Manual search)
Manual search
If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search.
1.Enter into POS.MEMORY menu, press the 
or 
button to
select and highlight POSITION. Press the 
or 
button to select a desired position number (from 00~99).
Note: press the 
or 
button to select a channel number
within 0.7 second. Press and hold the 
or 
button for over 0.7 second to select a decimal number.
POS.MEMORY
POSITION 01
BANDVHFL
SKIPOFF
SEARCH DOWN
MFTDOWN AUTO MEMORY 
! ! ! ! ! ! . . . . . .
2.Press the 
or
button to select and highlight SEARCH. Press
the 
button to search channels from current channel to higher
channel. Press the 
button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorised with the preset channel number.
Note: you can also make use of BAND selection to quicken the searching process in your desired band. Pressing the 
or 
button moves the band to the next step in the sequence below.
VHFL 
VHFH 
UHF
POS.MEMORY
POSITION 01
BANDVHFL
SKIPOFF
SEARCH DOWN
MFTDOWN AUTO MEMORY 
! ! ! ! ! ! . . . . . .
POS.MEMORY |
|
|
|
POSITION | 01 | ||
BAND | VHFL | ||
SKIP |
| OFF | |
SEARCH | DOWN | ||
MFT | DOWN | ||
AUTO MEMORY |
|
|
|
|
|
| |
! ! ! ! ! ! . . . | . | . . | |
3. When you want to store another channel with another position, repeat steps 1 & 2 above.
8