Palsonic 5159P Sleep timer and to select the language for the OSD, SLEEP30MIN, Language English

Page 15

OPERATION

Other functions

Sleep timer and to select the language for the OSD

SLEEP timer

Making use of the Sleep timer function allows you to have the set automatically turned off after a preset time.

Press the SLP button every time, the time displaying on the screen will change in the sequence below:

OFF 120MIN 110MIN.......... 10MIN

SLEEP:30MIN.

To select the language for the OSD

Making use of this function can switch the language for the OSD to either English or Chinese.

1.Press the MENU button repeatedly until the LANGUAGE menu appears on the screen.

LANGUAGE

ENGLISH

2.Press the or button to move the cursor to language. The selected language is displayed in red and the screen menu is automatically displayed in that language.

ENGLISH

3. Press the MENU button repeatedly to exit the menu.

Image 15

Contents 51CM Cordless Remote Colour Television Palsonic Customer Service TelephoneContents Introduction Page Battery installation Effective range of the remote control operationAntenna Connection Back View Front viewRemote Controller To turn the power on/off OperationSpecial indication To enter into menu To preset channels Auto searchManual search To preset channels Manual searchPOSITION, then select the unwanted program number with Be skipped when you select channels with the CH ButtonMFT Manual Fine Tuning Enter into the POS. Memory menu, select and highlightChannel Selection Setting of colour systemUsing the direct select buttons Using the CH buttonsTo select the picture mode Selectable pictureTo set the desired picture quality to the Memory position Mute Adjusting the volume and muting the soundTo adjust the sound volume To mute the soundTo select the language for the OSD Sleep timer and to select the language for the OSDSleep timer SLEEP30MINConnecting Other Equipment To connect AV input terminalsTV Video 1 Video To connect TV output terminal Others CRTVHF UHF Catv PAL-B/G 604-21753-06