Palsonic 5159P Connecting Other Equipment, To connect AV input terminals, TV Video 1 Video

CONNECTING OTHER EQUIPMENT

The following describes how to use and connect the TV with other AV equipment. Refer to the owner’s manual of the equipment to be connected as well.

To connect AV input terminals

You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound.

If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (photo type)

VTR with S-VIDEO terminal

				VTR without
				S-VIDEO terminal
	Aerial output	TO ANT IN	TO ANT IN	Aerial output
To audio	To S-VIDEO
output	output terminals			To audio	To video
				output	output

yellow (video)

white (audio L/MOMO) red (audio R)

To select the input, press the TV/AV button on the TV set or AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays program number, or press channel select button or the

CH button.

TV VIDEO 1 VIDEO 2

If the colour of video input is abnormal, the colour system setting may be incorrect. Press the SYS button until the COLOUR AUTO is displayed on the screen. If the picture is still abnormal,

press the or button until normal colour appears.

NOTE on the S-VIDEO terminal

S-VIDEOinput terminal and the VIDEO terminal can not be used at the same time. To use equipment connected to the VIDEO terminal, disconnect plug from the S-VIDEO terminal.

14