Palsonic 5159P Setting of colour system, Channel Selection, Using the direct select buttons

OPERATION

The setting of colour system & channel selection

The setting of colour system

1.Press the SYS button, the colour system will be displayed on the screen.

2.If the colour is abnormal, press the or button to select the

proper colour system. Every time you press the or button, the colour system will change in the sequence below.

AUTO PAL 4.43NTSC 3.58NTSC

Now you can watch the broadcasting TV program at the preset channel.

COLOR AUTO

COLOR PAL

Channel Selection

You can select your desired TV program by one of the following methods.

.Using the direct select buttons

To select a one-digit position number, press the -/- - button to display

"-" and 0~9 to select a number. (0~9)

1

. To select a two-digit position number, press -/- - to display "-" and press 0~9 to select number (10~99)

30

Using the CHbuttons

Press CH to select lower position numbers; CH to select higher ones.

10