Palsonic 5159P owner manual

Page 4

NOTES FOR OPERATION

*Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for

a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.

*Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set.

Cautions for safety

Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power supply of the other type.

When an unusual situation occurs, turn off the power switch at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.

Do not expose the TV set to rain or excessive moisture, to prevent tire disaster or electric shock. Avoid using the set in very warm or damp places. Never use it in a bathroom.

There exists High Voltage in this TV set. Do not remove the cover to avoid danger.

When the TV set is to be left unattended, please turn off the power switch and remove the plug from the wall outlet.

In order to wipe dust off the picture tube or off the cabinet, you should remove the power plug from the wall outlet first. You can wipe lightly with a piece of dry, clean, soft cloth.

The TV set should be placed on an adequate place without exposing it to direct sunlight and other sources of heat to prevent the deformation of the cabinet or damage to components.

Do not cover the Ventilating holes in the cabinet. Keep a space of more than 5cm from the walls to the TV set, to guarantee the good ventilation.

When the power cord or the plug is damaged, please contact a qualified service department to get service.

2

Image 4
Contents Palsonic Customer Service Telephone 51CM Cordless Remote Colour TelevisionContents Introduction Page Effective range of the remote control operation Battery installationAntenna Connection Front view Back ViewRemote Controller Operation To turn the power on/offSpecial indication To preset channels Auto search To enter into menuTo preset channels Manual search Manual searchBe skipped when you select channels with the CH Button MFT Manual Fine TuningEnter into the POS. Memory menu, select and highlight POSITION, then select the unwanted program number withSetting of colour system Using the direct select buttonsUsing the CH buttons Channel SelectionSelectable picture To select the picture modeTo set the desired picture quality to the Memory position Adjusting the volume and muting the sound To adjust the sound volumeTo mute the sound MuteSleep timer and to select the language for the OSD Sleep timerSLEEP30MIN To select the language for the OSDTo connect AV input terminals Connecting Other EquipmentTV Video 1 Video To connect TV output terminal CRT OthersVHF UHF Catv PAL-B/G 604-21753-06