Planet Technology DVR-470 ：Alarm trigger record channel setup, ：Schedule for alarm handle method

Step 4：Alarm trigger record channel setup

You can select channels to record for each alarm input. In the sub menu, you can use 【ENTER】or【EDIT】key to enable record channel. “×” means disable and “9 means enable. Note：In order to trigger the channel to record, in “Recording” menu, you must enable recording and select record type as “Alarm” or other related type. Please refer to

chapter 5.12.

Step 5：Schedule for alarm handle method

When there is external alarm happened in the schedule, DVR will response according to the handle methods.

Step 6：Alarm handle method

You can select one or more handle method：“On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”.

Description：If “On Screen Warning” is enabled, when there is external alarm happened and DVR is in preview mode, DVR will pop-up the related camera. If you trigger more than one camera, DVR will pop-up them one by one every 10 seconds. When the external alarm is disappeared, DVR will restore preview mode.

Step 7：Save setup

In “Alarm in Handling” sub menu, press “Confirm” button and return “Alarms” menu. In “Alarms” menu, press “Confirm” button to save the parameters.

Step 8：PTZ Linkage

Move “Active Frame” to “PTZ Linkage” button, press【ENTER】key to enter into “PTZ Linkage” setup menu：

Page 61