Username, password and Verify password：Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN.
Phone：Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone number of remote PC.
Callback and Data Encryption：Only used when work mode is “PPP”. They are not available.
Confirm：Save parameters and return main menu.
Cancel：Abort modification and return main menu.
Example：PPP (Modem) passive dialup through PSTN
There are two Modems. One is connected DVR
Setup at DVR end
Step 1：RS232 setup Setup baud rate, data bit, stop bit, parity and flow control. They must be the same as those of modem connected with PC.
Step 2：Video setup In “Recording” menu, select the camera you want to transfer through PSTN. If you set CIF resolution, we suggest you set frame rate as 1 FPS. If you set QCIF resolution, the frame rate can be selected under 4FPS. You can adjust bit rate, resolution and frame rate according to real conditions.
Page 71