Planet Technology DVR-470, DVR-1670 user manual Unit Name and Device ID, Unit name, Device ID：

5.3Unit Name and Device ID

Unit name

In the “Display” menu：

There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame” to unit name edit box, press【EDIT】key to enter into edit status, you can modify the unit name. About how to input characters, please refer to chapter 3.4. Press 【ENTER】key to finish modification. Select “Confirm” button and press【ENTER】, you can save the new unit name and make it into effect. Press “Cancel” button or【ESC】key to abort modification.

Device ID：

When you use IR controller to operate DVR, you must use device ID to select DVR. The default device ID of DVR is “88”. If there are more than one DVR in one place, please define different device ID for each DVR. Otherwise, the IR controller will control all DVR with the same device ID at the same time.

In “Display” menu, move “Active Frame” to the device ID edit box, in the edit status, you can use numeric keys to input new device ID. The device ID value is ranged among 01-100. After you finish the modification, press “Confirm” button to save and take effect or press “Cancel” to abort modification.

Page 39