Sonic Alert DCP301 user manual Setting up events 1 to 3 items, When event type is PV type event

Chapter 8. PROGRAM SETUP

■Setting up events 1 to 3 items

●When event type is PV type event

(1)In the setting display state, move to the event 1 to 3 items of the segment to be set up on the programming map.

(2)If you press ENT , the upper display starts blinking to indicate start of entry to the No.1 setup.

(3)Press , , or to set to the No.1 setup event operating point setting. Setting range: -1999 to 9999U

0 to 9999U (in case of absolute value deviation event) -10.0 to 110.0% (in case of MV, MFB event)

(4)When you press ENT , blinking on the upper display stops.

(When FUNC + CLR are pressed, the upper display returns to “- - - -” and stops blink- ing.)

●Display (PV type event)

Program No. Segment No.

Pattern

tendency

Operating point setting value

LEDs corresponding to EV1 to EV3 lit. T1 to T5 all out

•“- - - -” is displayed for the setting values in non-set segments.

•When setup data C 6 8 is set to 1, event 1 to 3 items on the programming map are skipped and not displayed.

8-6