Sonic Alert DCP301 user manual SP output, Auxiliary output

Chapter 5. FUNCTIONS

■SP output

When the DCP301 is selected for use as a programmer, control output is operational. On 5G output models, SP output is processed is as follows.

Main output types

Setting: Setup data C 18

Upper/lower limit scaling

Setting: Setup data C 19/C20

MV in READY mode READY mode

Manual SP1

Upper/lower limit scaling MANUAL mode

Setting: Setup data C 16

Setting: Setup data C 19/C20

SP1 output

Output 1

Current output 4 to 20mA (0 to 20mA)

■Auxiliary output

● Auxiliary output 1

When auxiliary output 1 or 2 are supported on 0D, 5G or 6D output models, auxiliary output 1 is processed as follows.

Auxiliary output 1 type	Setting: Setup data C46
Upper/lower limit scaling	Setting: Setup data C47/C48
		When READY mode is entered at auxiliary output
	4mA (0mA)
		type SP and deviation
		When auxiliary output type is NOP
		When auxiliary output type is set to MFB on non-
		2G output models
		When auxiliary output type is set to MV by program-
		mer function on 5G output models
Output 2	Current output 4 to 20mA (0 to 20mA)

●Auxiliary output 2

When auxiliary output 2 is supported on 0D, 5G or 6D output models, auxiliary output 2 is processed as follows.

When auxiliary output 1 is supported on 2G, 3D or 5K output models, auxiliary output 2 is processed as follows.

Auxiliary output 2 type

Upper/lower limit scaling

Setting: Setup data C49

Setting: Setup data C50/C51

Output 3

4mA (0mA)	When READY mode is entered at auxiliary output
	type SP and deviation
	When auxiliary output type is NOP
	When auxiliary output type is set to MFB on non-2G
	output models
	When auxiliary output type is set to MV by program-
	mer function on 5G output models
	When auxiliary output type is set to MV by 3-position-
	proportional control on 3D output models

Current output 4 to 20mA (0 to 20mA)

5-22