Sonic Alert DCP301 user manual 10-2, Rsw

Chapter 10. SPECIFICATIONS

	Item			Specification
Input	Over-range detection	110%FS min.:		Upscaled
	threshold	-10%FS max.: Downscaled (Note that F50 range is not downscaled. Lower readout
				limit of B18 range is 20° C, 68° F.)
	Cold junction compensa-	± 0.5° C (under standard conditions)
	tion accuracy
	Influence of surrounding	± 0.2° C (at 0 to 50° C range)
	temperature on cold
	junction compensation
	Cold junction compensa-	Internal/external (0° C only) compensation selectable
	tion system
	Scaling	-1999 to 9999U (settable at dc voltage and dc current ranges. Reverse scaling and
		decimal point repositioning possible)
	Square root extraction	Dropout 0.1 to 10.0%, Possible by dc current and voltage ranges
	Linearization table approximation	12 (both line ends fixed, 11 points variable)
	Input bias	-1000 to 1000U variable
	Digital filter	0.0 to 120.0s variable (filter OFF at 0.0)
External	Number of inputs	12
Switch	Types of connectable	Dry contacts (relay contact) and open-collector (current sink to ground)
(RSW)	outputs
Input	Terminal voltage (open)	10.4 to 12.6V (under operating conditions) across common terminal (terminal 25 ) and
		each input terminal
	Terminal current (short-	5.0 to 6.6mA across each terminal (under operating conditions)
	circuit)
	Allowable contact resistance	ON:	700Ω	max. (under operating conditions)
	(dry contact)	OFF:	10kΩ	min. (under operating conditions)
	Residual current (allowable	3V max. (under operating conditions)
	open-collector ON)
	Leakage current (allowable	0.1mA max. (under operating conditions)
	open-collector OFF)
	Parallel connection to	Can be connected to DCP301/302 series.
	other instruments
	Assignments (fixed)	RUN, HOLD, RESET, ADV, program No.
	Assignments (variable)	FAST, PV start, AT, AUTO/MANUAL, G.Soak cancel, reverse/direct action
	Input sampling cycle	0.1s
	ON detection min. hold time	0.2s (program No. 0.4s)
Indication	Upper display	Green 4-digit, 7-segment LED
/Program-		This normally displays PV values. Item codes are displayed in parameter setup.
mer
	Lower display	Orange 4-digit, 7-segment LED
		This normally displays SP values. Setting values are displayed in parameter setup.
	Program No. display	Green 2-digit, 7-segment LED
		This normally displays program No.
	Segment No. display	Green 2-digit, 7-segment LED
		This normally displays segment No. Item Nos. are displayed in parameter setup, and
		alarm No. is displayed when alarm occurs.
	Profile display	6 orange LEDs
		Displays program pattern rise, soak and fall tendencies.
	Status displays	22 round LEDs
		Modes:		RUN, HLD, MAN, PRG (green)
		Display details: PV, SP, OUT, TM, CYC (green)
		Battery voltage: BAT (red) (blinks at low voltage)
		Status:		AT, OT1, OT2, OT3 (orange)
		Events:		EV1, EV2, EV3, T1, T2, T3, T4, T5 (orange)
	Operation keys	13 rubber keys
	Loader connector port	1 (dedicated cable with stereo miniplugs)

10-2