External Switch RSW Operations | Sonic Alert DCP301 instruction

Chapter 6. OPERATION

6-4 External Switch (RSW) Operations

■External switch (RSW) inputs

In all, the DCP301 is provided with 12 external switch inputs. Each of these inputs are differentiated by RSW1, RSW2 and so forth to RSW12. On models whose option 2 cata- log No. is “0”, only inputs RSW1 to RSW4 are mounted.

(RSW: external switch input)

●External switch input types

The functions of RSW1 to 4, and RSW8 to 12 are fixed.

The functions of RSW5 to 7 are selected by the setup setting.

External	Function		Detection Method
Switch No.

RSW1	RUN		Rising edge

RSW2	HOLD		Rising edge

RSW3	RESET		Rising edge

RSW4	ADV		Rising edge

	Selected by setup from the following functions

RSW5	FAST		Rising edge

RSW6	PV start		Rising edge

RSW7	AUTO/MANUAL		Rising/falling edge

	AT start/stop		Rising/falling edge

	G.Soak cancel by OR conditions		Status

	G.Soak cancel by AND conditions		Status

	Direct/reverse action switching		Status

RSW8	Program No. selection	Weighting 1	Status

RSW9	Program No. selection	Weighting 2	Status

RSW10	Program No. selection	Weighting 4	Status

RSW11	Program No. selection	Weighting 8	Status

RSW12	Program No. selection	Weighting 10	Status

•With PV is valid only in the program operation mode and READY mode, and the PV start RUN mode is entered regardless of the PV start setting in the program. Note, however, that RUN mode is entered from the start point of the selected segment in READY mode when there is no SP for the PV start.

•With G.Soak cancel by OR conditions, G.Soak standby is canceled when the external switch turns ON or when the PV enters the G.Soak width.

•With G.Soak cancel by AND conditions, G.Soak standby is canceled when the exter- nal switch turns ON or when the PV enters the G.Soak width.

•When the external switch turns ON by direct/reverse action switching, control opera- tion is the opposite to that set in setup parameter C 0 1. When the external switch turned OFF, control operation is that set in setup parameter C 0 1.

6-8

Image 81

Sonic Alert DCP301 user manual External Switch RSW Operations, External switch RSW inputs, External switch input types

Contents

DCP301 Digital Program Controller User’s Manual EN1I-6197 Issue 7 02/04 Warranty Safety Precautions Page Handling Precautions Name Model No ’ty Remarks Unpacking Parameter Setup WiringProgram Setup Troubleshooting Contents Operation Functions Program Setup Parameter Setup Troubleshooting Specifications CalibrationIndex Conventions Used in This Manual High accuracy achieved by multi-range input FeaturesWide range of control output types Enhanced compatibility with PLC Basic Function Blocks RUN/HOLD Reset ADV Fast AUTO/MANUAL Parameters Data Structure System configuration by CPL communications System Configuration Model selection guide Model Numbers Names & Functions of Parts Structure Console Basic display stateDisplay MAN Category Function Key operation Keys Setup Program setupAssignment item To start program copy Loader jack Functions using two or more keys Input Type and Range No Resistance temperature detector RTDInputs Thermocouple Input Format Range No Code Range programmable Dc current, dc voltage Mounting External Dimensions Panel Cutout Dimensions Mounting locations Mounting Noise generating sources and countermeasures Dust-proof coverType Confirmation on Display Operation Hard Mounting method Handling Precautions Wiring Precautions Wiring Handling Precautions Wiring Compensating LeadHitachi Cable Co Terminal Connections Layout of Terminals and Recommended Lead Draw-out Direction Connecting the Ground and Power Supply Power supplyGround Wiring of Standard and Add-on Terminal Base Standard terminal layoutAdd-on terminal layout Connecting input Connecting Inputs analog inputs Relay output 0D Connecting control outputs outputs 1Current output 5G Position-proportional output 2G Voltage output 6D Heat/cool output 3DHeat/cool output 5K Connecting auxiliary outputs outputs 2 0D, 5G, 6D auxiliary outputs2G, 3D, 5K auxiliary outputs Connecting Event Output relay output Connecting Time Event Output open-collector Connecting External Switch RSW Input Wiring RS-485 interface Connecting for Communications Wire system RS-485 mutual connection RDA RDB Isolating Inputs and Outputs Control outputs 0D, 5G, 6D, 3D, 5KControl output 2G Data Data typesFunctions Patterns Program Patterns PV type events Events 1 to OFF H Time events Controller status events Onoff Time events 1 to Segment No. events PID set selection Soak guarantee soak Cycle PV start Pattern link Modes Mode typesProgram operation Constant-value operation RUN Mode transition During program operationDuring constant-value operation Program end Mode transition operations Manual Mode transition limitations Controller and Programmer ControllerProgrammer Input processing is carried out in the order shown below Input Processing Functions Output Processing Functions Control output5G output 0D, 6D output 2G output Dv-L/HY-L Dv-H/HY-H 3D, 5K outputs SP output Auxiliary outputAuxiliary output Startup flow Turning the Power on Switching the Basic Display Disp functions Display in program operation modeDisplay Output Model No Display CYC Display in constant-value operation mode Motor valve opening % Output state of events 1 to Program Selection How to select the program No External switch RSW inputs External Switch RSW OperationsExternal switch input types External Function Detection Method Switch No Program selection External Weighting State Switch No Read timing Timing of RSW1 toTiming of RSW8 to 12, RUN and PV start Auto-tuning AT Manual Operation and Auto-tuningManual operation Controller functions Pvsp Selecting the setting group in the parameter setup Parameter SetupD E is Name Upper Remarks Display Moving individual items in the parameter setup 9 C 0 How to register functions to keys How to Use ParaHow to register assignment items Base Setting Group Example Item Code Setting Auxiliary Value Remarks DisplayOperations by Para Order Item to Call by Basic Display Para key State Max items Variable parameter settings P a R a Parameter Setup List S T Parameter Setup Description of variable parameter settings C key lockT C program protect L MV change limit U t PID operation initial MVI D PID operation initialization I D 2 degrees of freedom Smart-tuning method selection F F Cool State Heat-side Output Cool-side Output Cmotor control method selection Tmotor valve opening adjustment fully open/closed time T motor valve opening automatic adjustment Manual Event configuration data settings E Parameter Setup Parameter Setup Parameter Setup 1 event 1 standby 2 event 2 standby 3 event 3 standby Description of event configuration data PID Set PID parameter settings P I d Parameter Setup Parameter Setup Parameter Setup Setup data settings S E t Parameters C P 1 to C P NOP Ready To input ROM ID Description of setup data settings 7 input 1 square root extraction dropoutSP1 lower limit 0 SP1 upper limit 6 PV display 5 time display2 cold junction compensation 4 voltage time-proportional output system 8 voltage output 1 adjustment Voltage output 2 adjustment Formulas 3 and 4 formulas must be satisfied 0 Special functions 1 Input 1 Zener barrier adjustment 3 CPL communications port selection Table data settings T B L To t -A . b To t -b . b Description of table data settings D E Constant-value operation data settings C N S t Program Setup How to enter program setupSelecting the program No. to set up Basic Display State Func + Prog keys Description of mode transition states see Segment No Program No.1 setting 12 to Programming mapShaded items Cannot be moved Display details Setting up pattern items Setting up events 1 to 3 items When event type is PV type eventDisplay PV type event When event type is time event When event type is controller status eventDisplay time event Time event No Setting value Setting up time events 1 to PI D Setting up PID set No. items Setting up G.Soak time-out items Setting up G.Soak guarantee soak items Setting up cycle items Setting up PV start items Deleting programs Setting up pattern link items Inserting and deleting segments Display inserting segmentDisplay deleting segment Copying Programs P Y E S General Reset Self-diagnostics at power on Self-diagnostics and Alarm Code DisplaySelf-diagnostics at each sampling cycle Intermittent self-diagnostics during operation Self-diagnostics only when certain functions are operating Alarm code displayAlarm categories Cause Remedy Trouble during Key Entry Controller is in the Ready mode Press Troubleshooting Items cannot be changed by pressing in program setup state RUN. HOLD, FAST, END Motor Adjustment is Impossible Normal wiring for reverse motor rotation Normal wiring for direct motor rotationAlarm display caused by wrong wiring and causes C L Replacing the Battery BAT LED blinkingItems to prepare Replacement procedure Handling Precautions Remove the battery connector from the RAM board Gray holder Specifications SpecificationsSpecification 10-1 RSW 10-2 Auto 10-3 10-4 10-5 10-6 10-7 Accessories/option list 10-8 Hard dust-proof cover set sold separately Soft dust-proof cover set sold separatelyTerminal cover set sold separately 10-9 Precautions before calibration Equipment needed11-1 11-2 Model number DCP30 * * * * ESCalibration Calibration Items for Each Model 11-3 AdJS 11-4 Calibration Flowchart 1/2 11-5 Calibration Flowchart 2/2 11-6 Enter calibration modeProg Display SEG Display Key test Function test11-7 Upper Display Digital input test Display test11-8 Terminal Digital output test for control output Digital output test for event11-9 PV calibration Key11-10 Range Table of CH1 TC Group Type Code Range No. Gain No 11-11 Current output calibration Cold junction sensor calibrationPress ENT key 11-12 11-13 11. Current Outputs 11-14 Programming Map Safety Requirements Index-1 Index Index-2 Control output SP output Index-3 Time event output open-collector connection 00-08 3rd Edition 99-04 EN1I-6197 1st Edition 00-06 2nd Edition01-06 4th Edition 03-06 5th Edition Honeywell Service Centers Argentina No. CP-UM-5093E