Sonic Alert DCP301 user manual Parameters C P 1 to C P

Chapter 7. PARAMETER SETUP

No.	Item Code		Item	Factory	User		Setting
				Setting	Setting
11	C	1 1	PID set auto-	0		0: OFF (PID set segment designation)
			switching (CH1)			1: ON
						[Note]
						When set to 1, the PID set items in the program are
						invalid.
						The switching point for auto-switching is set in variable
						parameters (C P . 1 1 to C P . 1 7).
12	C	1 2	MV setting at input 1	0		0: OFF
			over-range (MV1)			1: ON
13	C	1 3	MV at input 1 over-	0		-10 to 110%
			range (MV1)			[Note]
						When C	1 2 setting is 0, “– – – –” is displayed and
						setting is not possible.
14	C	1 4	Manual change	0		0: Bump-less
			mode (MV1)			1: Preset
						[Note]
						When the programmer function is selected, operation
						is bump-less regardless of the setting of C 1 4.
15	C 1 5		Preset manual value	0		-10 to 110%
			(MV1)			[Note]
						When C	1 4 setting is 0, “– – – –” is displayed and
						setting is not possible.
16	C	1 6	MV in READY mode	0		-10 to 110%
			(MV1, MV1 heat-			[Note]
			cool output)			This setting is invalid even if the programmer function
						is selected by C 1 8 setting.
						On heat/cool models, this setting functions as the MV
						(heat) setting in the READY mode.
17	C	1 7	MV (cool) in READY	0		-10 to 110%
			mode (MV1 heat-			[Note]
			cool output)			When the model is not a heat/cool model, “– – – –” is
						displayed and setting is not possible.
18	C	1 8	Main output type	0		0: MV1 output (controller function)
			(CH1)			1: SP1 output (programmer function)
						[Note]
						When the model is not a 5G output model, “– – – –” is
						displayed and setting is not possible.
19	C 1 q		SP1 main output	0U		-1999 to 9999U
			lower limit (4mA			[Note]
			setting)			When the model is not a 5G output model and 8
						setting is 0 on a 5G output model, “– – – –” is dis-
20	C 2 0		SP1 main output	1000U		played and setting is not possible.
			upper limit (20mA			The relationship between the analog outputs and SP1
			setting)			can be inverted by inverting the upper and lower limit
						values.
21	C 2 1		Unused	–		[Note]
22	C 2 2		Unused	–		“– – – –” is displayed and setting is not possible.
23	C 2 3		Unused	–
24	C 2 4		Unused	–
25	C 2 5		Unused	–
26	C 2 6		Unused	–
27	C 2 7		Unused	–
28	C 2 8		Unused	–
29	C 2 q		Unused	–
30	C 3 0		Unused	–

7-28