Sonic Alert DCP301 user manual Nop

Chapter 7. PARAMETER SETUP

No.	Item Code	Item	Factory	User		Setting
			Setting	Setting
31	C 3 1	Unused	–		[Note]
32	C 3 2	Unused	–		“– – – –” is displayed and setting is not possible.
33	C 3 3	Unused	–
34	C 3 4	Unused	–
35	C 3 5	Unused	–
36	C 3 6	Unused	–
37	C 3 7	Unused	–
38	C 3 8	Unused	–
39	C 3 Q	Unused	–
40	C 4 0	Unused	–
41	C 4 1	Unused	–
42	C 4 2	Unused	–
43	C 4 3	Unused	–
44	C 4 4	Unused	–
45	C 4 5	3-position control	0		0: 3-position control disabled
					1: 3-position control enabled
					[Note]
					On models not supporting 3D output, “– – – –” is
					displayed and setting is not possible.
46	C 4 6	Auxiliary output 1	0		0: PV1
		type			1: SP1
					2: Deviation1
					3: MV1
					4 to 7:	NOP
					8: MFB
					9 to 11: NOP
					[Note]
					On models not supporting auxiliary output 1, “– – – –”
					is displayed and setting is not possible.
					When set to NOP (or to MFB on models other than 2G
					output models), output is fixed to 4mA.
					When set to SP or deviation, output in the READY
					mode is fixed to 4mA.
47	C 4 7	Auxiliary output 1	0		-1999 to 9999U
		lower limit (4mA)			-199.9 to 999.9%
					[Note]
					When the auxiliary output type is MV or MFB, the unit is
48	C 4 8	Auxiliary output 1	1000
		upper limit (20mA)			%. Otherwise, the unit is U.
49	C 4 q	Auxiliary output 2	0		0: PV1
		type			1: SP1
					2: Deviation1
					3: MV1
					4 to 7:	NOP
					8: MFB
					9 to 11: NOP
					[Note]
					When auxiliary output 2 is not supported, “– – – –” is
					displayed and setting is not possible.
					When set to NOP (or to MFB on models other than 2G
					output models), output is fixed to 4mA.
					When set to SP or deviation, output in the READY
					mode is fixed to 4mA.

7-29