Sonic Alert DCP301 user manual Parameter Setup

Chapter 7. PARAMETER SETUP

No.	Item Code	Item	Factory	User	Setting
			Setting	Setting
29	M .-C	Motor control	0		0: MFB control (conventional) + estimated position
		method selection			control
					1: MFB control (conventional) only
					2: Estimated position control only
					[Note]
					On models other than 2G output models, “– – – –” is
					displayed and setting is not possible.
30	M .-A T	Motor valve opening	0		0: Adjustment disabled
		automatic adjust-			1: Adjustment enabled
		ment			[Note]
					On models other than 2G output models, “– – – –” is
					displayed and setting is not possible.
					On 2G output models, when M .-Csetting is 2, “– – – –
					” is displayed and setting is not possible.
31	M .-C L	Motor valve opening	1000		0 to (fully open adjustment - 500)
		adjustment fully			[Note]
		closed position			On models other than 2G output models, “– – – –” is
					displayed and setting is not possible.
					On 2G output models, when M .-Csetting is 2, “– – – –
					” is displayed and setting is not possible.
32	M .-O P	Motor valve opening	9000		(fully closed adjustment + 500) to 9999
		adjustment fully			[Note]
		open position			On models other than 2G output models, “– – – –” is
					displayed and setting is not possible.
					On 2G output models, when M .-Csetting is 2, “– – – –
					” is displayed and setting is not possible.
33	M .-T	Motor valve opening	30.0		5.0 to 240.0s
		adjustment fully			[Note]
		open/closed time			On models other than 2G output models, “– – – –” is
					displayed and setting is not possible.

7-9