Sonic Alert DCP301 user manual Ready

Chapter 7. PARAMETER SETUP

No.	Item Code	Item	Factory	User		Setting
			Setting	Setting
50	C 5 0	Auxiliary output 2	0		-1999 to 9999U
		lower limit (4mA)			-199.9 to 999.9%
51	C 5 1	Auxiliary output 2	1000		[Note]
		lower limit (20mA)			When the auxiliary output type is MV or MFB, the unit is
					%. Otherwise, the unit is U.
52	C 5 2	External switch	0		0: NOP
		input RSW5			1: Fast operation
		assignment			2: PV start
53	C 5 3	External switch	0		3: NOP
		input RSW6
					4: AT start/stop
		assignment
					5: NOP
54	C 5 4	External switch	0
					6: Manual/auto operation
		input RSW7
					7: Cancel G.Soak by OR conditions
		assignment
					8: Cancel G.Soak by AND conditions
					9: Direct/reverse action inversion
					10 to 20: NOP
					[Note]
					On external switch 4-input models, “– – – –” is dis-
					played and setting is not displayed.
					When the same assignment is set to two or more RSWs,
					the RSW setting with the lowest No. is valid.
					When this setting is set to NOP, the controller state is
					not switched by external switch input ON/OFF. The
					controller state can be switched ON/OFF by communi-
					cations.
55	C 5 5	PARA assignment	1000		1000 to 5000
		item 1			[Note]
56	C 5 6	PARA assignment	1000		To set the No., add the No. of the item to be assigned
		item 2			to PARA	to the following values for the setting group
57	C 5 7	PARA assignment	1000		containing that item.
		item 3			• 1000:	Constant-value operation data
58	C 5 8	PARA assignment	1000		• 1500:	PID parameter
		item 4			• 2500:	Variable parameter
59	C 5 q	PARA assignment	1000		• 3500:	Event configuration data
		item 5			• 4000:	Table data
60	C 6 0	PARA assignment	1000		• 4500:	Setup data
		item 6			Assignments to which a nonexistent No. have been set
61	C 6 1	PARA assignment	1000		are invalid.
		item 7
62	C 6 2	PARA assignment	1000
		item 8
63	C 6 3	Operation comple-	0		0: READY
		tion state			1: END
64	C 6 4	Program time unit	0		0: h/min
					1: min/s
65	C 6 5	Time display	0		0: Remaining segment time
					1: Total operation time
					[Note]
					The total operation time returns to 0 in the READY mode.
66	C 6 6	PV display	0		0: ON
					1: OFF
					2: ON
					3: OFF
					[Note]
					Settings 0 and 2, and 1 and 3 mean the same, respec-
					tively.

7-30