Chapter 8. PROGRAM SETUP
■Inserting and deleting segments
(1)In the setting display state, move to the pattern item of the segment where the seg- ment is to be inserted or deleted on the programming map.
(2)If you press FUNC + ENT , the display changes to confirm insertion of the segment, and “I N S .” is displayed blinking in the upper display.
(3)If you press 
, the display changes to confirm insertion of the segment, and “I N S .” is displayed blinking in the upper display.
If you press 
, the display changes to confirm deletion of the segment, and “D E L .” is displayed blinking in the upper display.
(4)If you press ENT while “I N S .” is displayed on the upper display, the segment is inserted.
If you press ENT while “D E L .” is displayed on the upper display, the segment is deleted.
(5)The DCP301 returns to the setting display state.
●Display (inserting segment)
Program No. |
| Segment No. |
| I N S. |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
●Display (deleting segment)
Program No. |
| Segment No. |
| D E L . |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
•When you insert a segment, a new segment is automatically created at the currently displayed segment No., and all segment Nos. onward are incremented by one. The setting of the inserted segment is as follows:
SP setting value: Same value as original segment before the new segment was in serted
Time setting value: 0:10
Events, time events and G.Soak are not set, and the PID set No. is set to 0.
•If you try to insert a segment in a program already containing 30 segments, pressing ENT will not insert the segment.
•When you delete a segment, the next segment shifts down to the currently displayed segment No. and subsequent segment Nos. are decremented by one.
When you delete the last segment, the display changes to “- - -
•Segments cannot be inserted or deleted from currently running (RUN, HOLD, FAST, END) programs.
