Sonic Alert DCP301 user manual Functions using two or more keys, Loader jack

Chapter 2. NAMES & FUNCTIONS OF PARTS

■Functions using two or more keys

PROG + RUN/HOLD

PROG + DISP

FUNC +

FUNC + PARA

FUNC + PROG

FUNC +

FUNC + CLR

FUNC + ENT

:Reset keys

Press RUN/HOLD with PROG held down in the basic display state to reset the controller. The controller enters the READY mode in the RUN, HOLD, FAST or END modes. The controller cannot be reset in the READY mode by key operation.

:Advance keys

Press DISP with PROG held down in the program operation mode in the basic display state to advance the program.

In the RUN, HOLD or FAST modes, the program advances to the next segment. The controller cannot advance in the READY mode by key operation.

:Fast keys

Press with FUNC held down in the program operation mode in the basic display state to fast-operate the program.

The controller enters the FAST mode from the RUN or HOLD modes.

:Parameter setup keys

Press PARA with FUNC held down in the basic display state to move to selection of the setting group (major items) in the parameter setup state.

:Program setup (programming) keys

Press PROG with FUNC held down in the program operation mode in the basic display state to move to the program setup (programming) state.

Press PROG with FUNC held down in the program setup state to change the No. of the program to be set up in ascending order.

:Program No. change keys

Press with FUNC held down in the program setup state to change the No. of the program to be set up in descending order.

:Program item delete keys

Press CLR with FUNC held down during entry of settings in the program setup state to clear the setting.

:Segment insert/delete keys

Press ENT with FUNC held down at SP or time item in the program setup state to move to the segment insert/delete screen.

+	PROG	: Program copy keys
		Press PROG with	held down in the program operation READY mode in the basic display
		state to move to the program copy screen.
FUNC	+ CLR + DISP	: General reset keys
		Press CLR and DISP	with FUNC held down in the READY AUTO mode in the basic display

state to move to the general reset confirmation screen.

■Loader jack

This jack is for connecting the loader. Objects other than the loader plug should not be inserted into this jack.

The loader jack is not isolated from internal digital circuits.

Be sure to cap the loader jack when it is not in use.

2-7