Palsonic VCR9688 owner manual Maintain Good Ventilation

Page 6

CAUTION AND CARE

NOTICE:

Unauthorized recording of copyrighted television programmes, films, video tapes and other materi- als may infringe on the rights of copyright owners and be contrary to copyright laws.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SER- VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

When the VCR is suddenly moved from a cold environment to a warm environment, some con- densation will occur inside the VCR. If the VCR is operated as it is, the tape may stick to the tape head and damage to the tape and/or the deck will result. Under these circumstances, do not operate the VCR for about 2 hours with the Mains cord connected so as the VCR will dry out.

MAINTAIN GOOD VENTILATION

There are many ventilation holes on the bottom of the VCR. For maximum ventilation place the VCR on a hard level surface only.

DO NOT PLACE ANYTHING ON THE VCR

Heavy objects placed on the VCR will cause damage. The top of the VCR is also slotted to provide ventila- tion. Do not obstruct these ventilation slots.

NEVER INSERT ANY OBJECT INTO THE CABINET Do not insert any kind of foreign object into the VCR. This not only creates a safety hazard but can also cause extensive damage to the mechanism.

PROTECT THE MAINS CORD

Do not damage the Mains Cord. Damage to the Mains Cord may cause a fire or shock hazard. When unplugging the Mains Cord, please hold by the plug and remove it carefully.

CABINET CARE

Clean with a soft cloth slightly moistened with a mild detergent and water. Wipe with a dry cloth.

NEVER USE ANY PETROLEUM BASE SOLUTIONS.

WHEN NOT IN USE

When you finish operating the VCR, always unload the cassette and turn OFF the OPERATE/TIMER button.

UNPLUG THE MAINS CORD AND DISCONNECT THE ANTENNA CABLES DURING A LONG ABSENCE When you leave your home for a long period of time, turn OFF the OPERATE/T/MER button, unplug the Mains Cord and disconnect the antenna cables. Please note that on your return the calendar. clock data and channels will have to be reprogrammed.

For your reference, please record the serial number

Serial Number:

 

of your VIDEO CASSETTE RECORDER and the

Purchase Date:

 

date you purchased it in the following space:

 

 

 

 

E-2

Image 6
Contents VCR-9688 How to Use This Manual Remote control unit Identification of Controls Front panel Rear panel Multi-displayRear Panel Remote Control UnitFront Panel Multi-displayMaintain Good Ventilation Contents Introduction Power Supply Cable InstallationConnection of VCR and TV Using Audio/Video Connector Equipment ConnectionPreparations Changing the Time after the Initial Setting Initial Setting UpChanging the Language after the Initial Settings To Execute AMS again after the Initial SettingMenu Screen/Mode Screen Using the Menu ScreenUsing the Mode Screen On Screen Display OSDAMS Operation Channel PresettingManual Tuning Automatic Channel ChangingPreperation for G-Code Instant Video Programming Channel Selection Tuning with the V CH V ButtonsTuning with the Number Buttons Remote Control Only Selecting AUX PositionBasic Operation Auto Head CleanerPlayback Digital Tracking ControlStill Frame Special Effect PlaybackSearch Frame AdvanceMinute Skip Zero ReturnBlueback Function Recording Counter Display One-touch Timer Recording OTRCounter Function Changing OTR DurationProgrammable Timer Recording Programming procedureBefore programming When two programmes overlap Hints on ProgrammingCode Instant Video Programming Extending the Recording TimeAbout Error Messages If the G-Code number is incorrectSymptom Cause Remedy OthersSpecifications General Section Palsonic Customer Service Telephone