Palsonic VCR2120 instruction manual Connections

Page 19

If you are using a RCA cable, select the AV input on the TV to see the picture from the video

If you are not using a RCA cable, select the button number on the TV reserved for video input to see the picture from the video

CONNECTIONS

a n d c o p y i n g

To the TV via antenna cable (if you are not using a RCA cable)

If you are not using a RCA cable, your video can transmit pictures and sound to the TV via the coax aerial cable. Just tune the TV to the video's output channel (factory set to UHF CH26) Tune the TV carefully to ensure the best pictures and sound.

Once you have carried out the steps in "Connecting up the video recorder" (page 4), switch on your TV.

Press the OK button of the video's remote control longer than 5 seconds to call the video's test picture.

Tune the TV to the test picture using the channel pre-set functions of your TV as described in its manual.

When you have found the test picture, store it under the button number on your TV for video input.

Press the OK button of the video's remote control again longer than 5 seconds to release the test picture.

If the quality of the test picture transmitted to the TV is poor due to interference caused by a station transmitting on channel 26. you can tune the video to a different transmitting channel Find a free channel between 21 and 69 on your TV

Call the video's "MAIN MENU" choose "VCR Setup" then "RF Output Set".

Type in the free channel.

Store and exit

If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help (refer to the TV manual)

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Video cassette recorder VCR For your own safety Precautions19/20 ContnetsStill, Variable picture search, Variable slow motion Clock/Counter display, Remaining time and Cassette lengthN T R O L S Remote control unitOn screen display MachineButtons to use are marked on the following pages InstallationConnecting up the video recorder Fitting the remote controls batteriesSetting up the video recorder InstallationPlaying back A Y I N GS s e t t e s Variable slow motion Accessing new recordings index scanStill Variable picture searchStop your recording Simple recordingOne touch recording OTR C O R D I N GN c t i o n s Normal timer recordingConfirm Switch your video off R ESetting time and date Timer Review changing and erasingStore with OK button and exit with Menu button Remaining time and cassette length Accessing counter zero positionResetting the counter to zero Clock / counter displayPress the button for about 5 seconds Menu languagesChild Lock CassettesNEW Stations TuningStation names NEW STATI0NSSorting programme locations NEW StationsClearing programme locations Connections D c o p y i n g ConnectionsCopying AssemblingBrief Instruction Normal timer Before you ask a specialist Index Technical dataDimensions Video Power supplyVCR
Top Page Image Contents