REFERENCE
Not receiving all cable channels
•Make sure you have set up the GUIDE Plus+ Gold menu to recognize your cable box. Select GUIDE Plus+ Menu from the Main menu, then select Setup from the GUIDE Plus+ menu. Choose “Yes” when asked if you have a cable box. Then select Setup from the Main menu and make sure to search for all channels when prompted.
Can’t select certain channel
•Channel may be blocked or not approved in the Parental Controls menu.
•If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct “mode.”
Noisy stereo reception
•May be a weak station. Use SOUND button to change to mono mode instead of stereo.
No picture, no sound but TV is on
•Maybe the cable/air setting is set to the wrong position. To fix, select GUIDE Plus+ Menu from the Main menu, select the Setup option, and provide the correct information on the following screens.
•Maybe a vacant channel is tuned.
•If watching VCR (connected only through antenna input), make sure TV is tuned to channel 3 or
Sound okay, picture poor
•Check antenna connections.
•Try adjusting sharpness function to improve weak signals.
Black box appears on the screen
•Captioning may be turned on. Check the
GUIDE Plus+ Gold IR controllers not working
•Check to make sure the controllers are positioned correctly over the IR remote sensors.
•Your remote may be interfering with the IR controller. Place a piece of dark tape over the IR controller.
•GUIDE Plus+ Gold system control of cable box is slower than direct control of the box when changing channels.
CARE AND CLEANING
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft
The TV’s screen may be cleaned with a soft,
Never use strong cleaning agents, such as
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, avoid placing drinks or vases with water on top of the TV. This could increase the risk of fire or shock hazard or damage to the TV.
Caution: If fixed
55