SETUP AND CONNECTIONS
ADVANCED CONNECTIONS
Advanced connections give you better sound and video by separating the audio and video signals and enabling you to connect multiple components.
This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance.
Once you have made your connections, you will need to program the TV to tune to the correct video input channel in order to see and hear audio and video from a component such as a VCR or DVD player. You will program this later in the Interactive Setup.
Back of the TV
The diagram below describes each of the back panel jacks. When connecting A/V cables, be sure to connect corresponding OUTPUTS and INPUTS (Video to Video, Right Audio to Right Audio, etc.).
VIDEO and Audio Inputs
Connect any one of the following components:
• VCR | • Internet Access Device |
• Laserdisc Player | • DVD Player |
•Satellite Receiver
To view the component connected to VIDEO, use the WHO•INPUT button on the remote.
Audio Outputs
Connect to an audio receiver or amplifier for variable controlled or fixed level stereo output.
VIDEO |
| AUDIO | |
R | L / MONO | ||
|
IN
VCR
CONTROL
RL
OUT
CABLE/
ANTENNA
VCR Control
Connect the GUIDE Plus+ Gold system IR controller for
This optional connection can be used for better video quality picture.
Cable/Antenna
Takes the signal input from a cable, cable box, or an
6