MSB Technology DVD Audio Player Player Settings using the On Screen Menus, Switching on

Page 22

Player Settings using the On Screen Menus

When you switch on the player for the first time, you may either use the Setup Navigator to make more settings, or jump right in and start playing some discs. Before continuing, make sure that you’ve loaded the batteries in the remote control.

Switching on

After making sure that everything is connected properly and that the player is plugged in, press STANDBY/ON on the remote control to switch the player on. The pass-thorough features and volume control work all the time even when the player is off. When the player is turned on, the front display lights up and discs can be played.

·When the player is in standby, you can use the OPEN/CLOSE and PLAY buttons to switch the player on and open the disc tray/ start playing a loaded disc.

·My DVD player switches on but there is nothing displayed on my TV. Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected the player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

·If you connected this player to an AV receiver, make sure that the receiver is switched on and set to the correct input.

·This player features a screen saver. When on, if the player is stopped or paused and no button is pressed for five minutes, the screen saver starts. See Screen saver on page # 32 for how to switch it on.

Using the on-screen displays

For ease of use, this player makes extensive use of graphical on-screen displays (OSDs). You should get used to the way these work as you’ll need to use them when setting up the player, using some of the playback features, such as program play, and when making more advanced settings for audio and video.

All the screens are navigated in basically the same way, using the cursor buttons to change the highlighted item and pressing ENTER to select it.

·Throughout this manual, ‘Select’ means use the Joystick to highlight an item on-screen, then press ENTER.

·Information at the bottom of every OSD screen explains the currently selected menu item and shows which buttons can be used for that screen.

Here are what each navigation button does:

SETUP

Display/exit the on/screen display

(Joystick)

Changes the highlighted menu item

ENTER

Selects the highlighted menu item (both ENTER buttons work in exactly the same way)

(RETURN)

Returns to the previous menu without saving changes

Setting up with the Setup Navigator

Using the Setup Navigator you can make a number of other initial settings for this player. We recommend using the Setup Navigator, especially if you connected this player to an AV receiver for playing surround sound. To answer some of the questions about digital audio formats you may need to look at the instructions that came with your AV receiver.

1If a disc is playing, press (stop). Also turn on your TV and make sure that it is set to the correct video input.

2Press SETUP. The on-screen display (OSD) appears.

3Select ‘Setup Navigator’.

4Select a DVD language. Some DVD discs feature on-screen menus, soundtracks and subtitles in several languages. Set your preferred language here. Note that the language you choose here may not be available on all discs. If you want to select a language other than those listed, select Other Language. See Selecting languages using the language code list on page # 37 for detailed information.

5Is your TV/monitor compatible with progressive-scan video? Select Compatible, Not Compatible or Don’t Know. This setting is only applicable if you used the component video outputs to connect up your TV/monitor.

6Did you connect this player to an AV receiver? If you selected Not Connected here, that completes the setup. Press ENTER to leave the Setup Navigator.

7Did you connect the 5.1 channel analog audio outputs to your AV receiver? Select Connected or Not Connected.

8Did you connect a digital output to your AV receiver? Select Connected or Not Connected. If you selected Not Connected in both steps 7 and 8, that completes the setup. Press ENTER to leave the Setup Navigator. If you selected Connected in step 7, then answer the following questions about the speakers in your system, otherwise jump to step 12.

9Do you have a center speaker connected to your AV receiver? Select Connected or Not Connected.

22

Image 22
Contents Super DVD Audio Player Contents Player Settings using the On Screen Menus IEEE1394 Setup Or Projector. It is a complete system. If Preamp Upgrade Unique Features and Unprecedented PerformanceBurn-In Features Using the remote controls Disc/Content Format Playback CompatibilityDVD-Video regions Stand alone system System Design and ConnectionsEnhanced Audio system Add to a complex home theater Enhanced Home Theater DesignInputs Rear Panel DetailsVideo Outputs Digital Audio Outputs Analog Audio OutputsMSB Network IEEE1394 Network Creating an IEEE1394 networkFront Panel Controls DisplaySimple Volume Remote Remote controlsComplete Remote Page Setup Operations Player Setup Eight Channel Audio ConfigurationStereo Standard Configuration Configuration OptionsConfiguration Stereo Bi Amp ConfigurationStereo Tri Amp Configuration Home Theater StandardHome Theater with Downmixed Center Home Theater with Blended Mono Stereo SubsHome Theater with Blended Sides Center Channel DownmixingMaster Slave Mode Home Theater with Center RearUsing the on-screen displays Player Settings using the On Screen MenusSwitching on Setting up with the Setup NavigatorBasic playback controls Front panel and small remote controlsPlaying discs DVD disc menusFAQ Introduction Using the Disc Navigator to browse the contents of a discUsing the Multi Dial Scanning discsFrame advance/frame reverse Using repeat playUsing random play Looping a section of a discEditing a program list Creating a program listOther functions available from the program menu Switching DVD-RW audio channel Switching subtitlesSwitching DVD-Video audio language Switching DVD-Audio audio channelAudio Settings Menu Video Settings MenuCreating your own presets Using the Initial Settings menuDigital Audio Out settings Digital Out Default setting OnVideo Output settings Language settingsDisplay settings OptionsDVD Playback Mode Default setting DVD-Audio Auto Disc Menu Default setting OnGroup Playback Default setting Single Bonus GroupAudio Output Mode Default 2 Channel Sacd Playback Default setting 2ch AreaCD Playback Default setting PCM Playback SpeakersIEEE1394 Setup Additional InformationWidescreen TV users About the audio output settingsScreen sizes and disc formats Standard TV usersSelecting languages using the language code list Language code listGlossary Troubleshooting No sound out of the 8 analog outputsScreen is stretched or aspect does not change IEEE1394 troubleshooting IEEE1394-related messagesCare and Placement of the Player Limited WarrantyUpgrades and Modifications