MSB Technology DVD Audio Player user manual Playing discs, Basic playback controls, DVD disc menus

Page 23

10Do you have surround speakers connected to your AV receiver? Select Connected or Not Connected.

11Do you have a sub-woofer connected to your AV receiver? Select Connected or Not Connected. If you selected Not Connected in step 8, that completes the setup. Press ENTER to leave the Setup Navigator.

Questions 12 through 15 are concerned with the digital decoding capabilities of your AV receiver.

12Is your AV receiver Dolby Digital compatible? Select Compatible, Not Compatible or Don’t Know.

13Is your AV receiver DTS compatible? Select Compatible, Not Compatible or Don’t Know.

14Is your AV receiver compatible with 96kHz Linear PCM audio? Select Compatible, Not Compatible or Don’t Know.

15Is your AV receiver MPEG compatible? Select Compatible, Not Compatible or Don’t Know.

16Press ENTER to complete the setup, or press SETUP to quit the Setup Navigator without making any changes. Congratulations, setup is complete!

Playing discs

The basic playback controls for playing DVD, CD, SACD, Video CD and MP3 discs are covered here. Further functions are detailed in the next chapter. Throughout this manual, the term ‘DVD’ means DVD-Video, DVD-Audio and DVD-R/RW. If a function is specific to a particular kind of DVD disc, it is specified.

1 If the player isn’t already on, press STANDBY/ON on the remote to switch it on. If you’re playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input.

2 Press OPEN/CLOSE to open the disc tray.

3 Load a disc. Load a disc with the label side facing up, using the disc tray guide to align the disc. Never load more than one disc at a time.

4 Press (play) to start playback. If you’re playing a DVD or Video CD/Super VCD, a menu may appear. If you’re playing an MP3 disc, it may take a few seconds before playback starts, depending on the complexity of the file structure on the disc.

Basic playback controls

The list below shows the basic controls on the remote for playing discs. The following chapter covers more playback features in more detail.

(Play)

Starts playback. DVD and Video CD; if the display shows RESUME, playback starts from the resume point.

(pause)

Pauses a disc that’s playing or restarts a paused disc.

(Stop)

Stops playback. DVD-Video and DVD-RW and Video CD: Display shows RESUME. Press (stop) again to cancel the

resume function (The resume function is also cancelled when you eject the disc tray.)

(<<)Press to start fast reverse scanning. Press (play) to resume normal playback. (>>) Press to start fast forward scanning. Press (play) to resume normal playback.

(<<)

Skips to the start of the current track or chapter, then to previous tracks/chapters.

(>>)

Skips to the next track or chapter.

Numbers

Use to enter a title/group/track number. Press ENTER to select (or wait a few seconds.) If the disc is stopped, playback

starts from the selected title/group (for DVD) or track number (for CD/SACD/Video CD/Super VCD/MP3). If the disc is playing, playback jumps to the start of the selected chapter or track (within the current group for DVD-Audio).

Front panel and small remote controls

The (play), (stop), and (pause) buttons on the front panel and small remote work in exactly the same way as their remote control equivalents. The combined scan/skip buttons on the front panel and small remote work slightly differently from the remote buttons (<< and >>). Press and hold for fast scan; press for track/chapter skip. You may find with some DVD discs that some playback controls don’t work in certain parts of the disc. This is not a malfunction.

DVD disc menus

Many DVD-Video and DVD-Audio discs contain menus from which you can select what you want to watch or listen to. They may give access to additional features, such as subtitle and audio language selection, or special features such as slideshows. See the disc packaging for details. Sometimes menus are displayed automatically when you start playback; others only appear when you press MENU or TOP MENU. Some DVD-Audio discs feature a ‘bonus group’. To access this group you have to input a password, which you can find on the disc’s packaging. See page 67 for more information.

TOP MENU

Displays the ‘top menu’ of a disc—this varies with the disc.

MENU

Displays a disc menu—this varies with the disc and may be the same as the ‘top menu’.

23

Image 23
Contents Super DVD Audio Player Contents Player Settings using the On Screen Menus IEEE1394 Setup Or Projector. It is a complete system. If Burn-In Unique Features and Unprecedented PerformancePreamp Upgrade Features Disc/Content Format Playback Compatibility Using the remote controlsDVD-Video regions Enhanced Audio system System Design and ConnectionsStand alone system Enhanced Home Theater Design Add to a complex home theaterVideo Outputs Rear Panel DetailsInputs MSB Network Analog Audio OutputsDigital Audio Outputs Creating an IEEE1394 network IEEE1394 NetworkDisplay Front Panel ControlsComplete Remote Remote controlsSimple Volume Remote Page Configuration Options Player Setup Eight Channel Audio ConfigurationStereo Standard Configuration Setup OperationsHome Theater Standard Stereo Bi Amp ConfigurationStereo Tri Amp Configuration ConfigurationCenter Channel Downmixing Home Theater with Blended Mono Stereo SubsHome Theater with Blended Sides Home Theater with Downmixed CenterHome Theater with Center Rear Master Slave ModeSetting up with the Setup Navigator Player Settings using the On Screen MenusSwitching on Using the on-screen displaysDVD disc menus Front panel and small remote controlsPlaying discs Basic playback controlsFAQ Scanning discs Using the Disc Navigator to browse the contents of a discUsing the Multi Dial IntroductionLooping a section of a disc Using repeat playUsing random play Frame advance/frame reverseOther functions available from the program menu Creating a program listEditing a program list Switching DVD-Audio audio channel Switching subtitlesSwitching DVD-Video audio language Switching DVD-RW audio channelVideo Settings Menu Audio Settings MenuDigital Out Default setting On Using the Initial Settings menuDigital Audio Out settings Creating your own presetsLanguage settings Video Output settingsOptions Display settingsBonus Group Auto Disc Menu Default setting OnGroup Playback Default setting Single DVD Playback Mode Default setting DVD-AudioSpeakers Sacd Playback Default setting 2ch AreaCD Playback Default setting PCM Playback Audio Output Mode Default 2 ChannelAdditional Information IEEE1394 SetupStandard TV users About the audio output settingsScreen sizes and disc formats Widescreen TV usersGlossary Language code listSelecting languages using the language code list No sound out of the 8 analog outputs TroubleshootingScreen is stretched or aspect does not change IEEE1394-related messages IEEE1394 troubleshootingUpgrades and Modifications Limited WarrantyCare and Placement of the Player