and that the cable is properly connected.
Audio mix does not sound right or sounds incomplete (for example, inaudible dialog).
·Make sure that Audio Output Mode is set to 2 Channel if you’ve connected to the stereo inputs on your amplifier or TV. If you are using the downmixing in the volume control part of the player to downmix the center channel make sure you have connected your front channels to A1 and A2 outputs.
Disc containing the MP3 tracks won’t play.
·This player is compatible with
·If the message UNPLAYABLE is displayed when you try to play a disc/track, check the audio file formats.
Can’t hear effect of TruSurround.
·TruSurround does not work with CD, MP3,
·The
·Make sure that Audio Output Mode is set to 2 Channel.
·The effectiveness of TruSurround varies with the disc.
The audio recorded on a Super VCD disc is not output properly.
·If the audio is switched to [2] when playing a Super VCD that contains only one stereo soundtrack, there may be no sound at all. Press AUDIO to change the soundtrack
IEEE1394 troubleshooting
No IEEE1394 audio output.
·If the front panel IEEE1394 indicator is lit then:
-Check that your AV receiver is DTCP (Digital Transmission Copy Protection) compatible
-Check that your AV receiver is compatible with the type of disc that you’re trying to play (for example, SACD).
·If the front panel IEEE1394 indicator is unlit then: - Check that your AV receiver is set to the correct input.
- Check that the IEEE1394 cable is connected properly and that the cable isn’t damaged. Use an IEEE1394 cable no longer than 11 ft. / 3.5 meters.
- Check that components connected using the IEEE1394 interface are switched on and IEEE1394 Audio compatible. Do not connect DV format players/recorders or personal computers.
- Check that the IEEE1394 Audio Out setting is ON.
Auto Select Play doesn’t work.
·Make sure that the receiver has been selected in the Auto Select Play menu.
·Make sure that IEEE1394 Audio Out is set to On.
·Auto Select Play doesn’t work while LINK CHECK shows in the front panel display (see IEEE1394- related messages).
IEEE1394 audio is temporarily interrupted.
·See IEEE1394 related messages for possible causes of this.
No multichannel IEEE1394 audio.
·For multichannel SACD playback, make sure that SACD Playback is set to
·For multichannel
Playback starts automatically when the input function of the AV receiver is changed to this player.
·This is an IEEE1394 feature and not a malfunction.
A connected IEEE1394 component doesn’t work with this player.
·Depending on the connected component, this player may not work properly with it. See also the operating instructions that came with the other component.
Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your dealer.
IEEE1394-related messages
You may see the following messages displayed in the front panel display when using the IEEE1394 interface:
LINK CHECK - The player is checking the IEEE1394 network. It does this, for example, when components are added or removed from the network. The sound may be interrupted if this happens during playback.
PQLS ON - Displayed when the player receives a rate control on request from the receiver during playback. The sound may be interrupted momentarily when this happens. Note that the PQLS feature works only when the player is connected to a single receiver.
PQLS OFF - Displayed when the player receives a rate control off request from the receiver during playback. The sound may be
40