MSB Technology DVD Audio Player user manual Video Output settings, Language settings

Page 31

This setting must be left ON at all times. There is no digital output when playing SACDs and some DVD-Audio discs regardless of this setting. This setting is important for future compatibility with 44.1 kHz DVD-Audio discs which may be released with the digital output enabled. In such a rare case, the digital output should be manually turned off to assure proper sound.

Dolby Digital Out (Default setting: Dolby Digital)

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs. If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital>PCM. The output will be downmixed 2 Channel stereo.

DTS Out (Default setting: DTS>PCM)

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs. If your AV receiver (or other connected component) has a built-in DTS decoder, set this to DTS, otherwise set to DTS>PCM (DTS audio is converted to more compatible PCM audio). Check the manual that came with the other component if you’re unsure whether it is DTS compatible. If you set to DTS with a non-DTS compatible amplifier, noise will be output when you play a DTS disc. This setting applies only to DTS audio on DVDs. DTS-CD always output DTS digital audio as-is regardless of this setting.

Linear PCM Out (Default setting: Down Sample On)

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs. If your AV receiver (or other connected component) is compatible with high sampling rates (96 hKz), set this to Down Sample Off, otherwise set it to Down Sample On (96 hKz audio is converted to a more compatible 48 hkz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible. Even when set to Down Sample Off, some discs will still output down-sampled audio through the digital outputs ( you only get full sampling rate audio through the analog outputs and MSB Network). High sampling rate DVD-Audio discs (192kHz or 176.2kHz) automatically output down-sampled audio through the digital outputs.

MPEG Out (Default setting: MPEG>PCM)

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs. If your AV receiver (or other connected component) is compatible with MPEG audio, set this to MPEG, otherwise set it to MPEG>PCM (MPEG audio is converted to more compatible PCM audio). Check the manual that came with the other component if you’re unsure whether it is MPEG audio compatible.

Video Output settings

TV screen (Default setting: 16.9 (Wide))

If you have a widescreen TV, select the 16.9 (Wide) setting—widescreen DVD software is then shown using the full screen area. When playing software recorded in conventional (4:3) format, the settings on your TV will determine how the material is presented—see the manual that came with your TV for details on what options are available. When set to 16.9 (Compressed), progressive scan 4:3 material is shown with black bars on either side of the screen. If you have a conventional TV, select either 4:3 (Letter Box) or 4:3 (Pan&Scan). In Letter Box mode, widescreen software is shown with black bars at the top and bottom of the screen. Pan & Scan chops the sides off widescreen material to make it fit the 4:3 screen (so even though the image looks larger on the screen, you’re actually seeing less of the picture).

Component Out (Default setting: Interlace)

You only need to make this setting if you connected this player to your TV using the component video outputs. If you have a progressive- scan compatible TV, set this to Progressive for flicker-free video output. If your TV is not compatible with progressive-scan video, set to Interlace. Check the operating instructions that came with your TV if you’re unsure about its compatibility.

S-Video Out (Default setting: S2)

You only need to make this setting if you connected this player to your TV using an S-Video cord. If you find that the picture is stretched or distorted on the default S2 setting, try changing it to S1. (See also S1 and S2 in the Glossary on page # 38.)

Still Picture (Default setting: Auto)

This player uses one of two processes when displaying a still frame from a DVD disc. The default Auto setting automatically chooses the best setting each time. Field – produces a stable, generally shake-free image. Frame – produces a sharper image, but more prone to shake than field stills.

Language settings

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Super DVD Audio Player Contents Player Settings using the On Screen Menus IEEE1394 Setup Or Projector. It is a complete system. If Preamp Upgrade Unique Features and Unprecedented PerformanceBurn-In Features Disc/Content Format Playback Compatibility Using the remote controlsDVD-Video regions Stand alone system System Design and ConnectionsEnhanced Audio system Enhanced Home Theater Design Add to a complex home theaterInputs Rear Panel DetailsVideo Outputs Digital Audio Outputs Analog Audio OutputsMSB Network Creating an IEEE1394 network IEEE1394 NetworkDisplay Front Panel ControlsSimple Volume Remote Remote controlsComplete Remote Page Configuration Options Player Setup Eight Channel Audio ConfigurationStereo Standard Configuration Setup OperationsHome Theater Standard Stereo Bi Amp ConfigurationStereo Tri Amp Configuration ConfigurationCenter Channel Downmixing Home Theater with Blended Mono Stereo SubsHome Theater with Blended Sides Home Theater with Downmixed CenterHome Theater with Center Rear Master Slave ModeSetting up with the Setup Navigator Player Settings using the On Screen MenusSwitching on Using the on-screen displaysDVD disc menus Front panel and small remote controlsPlaying discs Basic playback controlsFAQ Scanning discs Using the Disc Navigator to browse the contents of a discUsing the Multi Dial IntroductionLooping a section of a disc Using repeat playUsing random play Frame advance/frame reverseEditing a program list Creating a program listOther functions available from the program menu Switching DVD-Audio audio channel Switching subtitles Switching DVD-Video audio language Switching DVD-RW audio channelVideo Settings Menu Audio Settings MenuDigital Out Default setting On Using the Initial Settings menuDigital Audio Out settings Creating your own presetsLanguage settings Video Output settingsOptions Display settingsBonus Group Auto Disc Menu Default setting OnGroup Playback Default setting Single DVD Playback Mode Default setting DVD-AudioSpeakers Sacd Playback Default setting 2ch AreaCD Playback Default setting PCM Playback Audio Output Mode Default 2 ChannelAdditional Information IEEE1394 SetupStandard TV users About the audio output settingsScreen sizes and disc formats Widescreen TV usersSelecting languages using the language code list Language code listGlossary No sound out of the 8 analog outputs TroubleshootingScreen is stretched or aspect does not change IEEE1394-related messages IEEE1394 troubleshootingCare and Placement of the Player Limited WarrantyUpgrades and Modifications
Top Page Image Contents