Motorola DVD operating instructions Satellite Box Cable Box Recorder

Page 30

S e t u p 5 : B o t h a C a b l e B o x a n d a S a t e l l i t e R e c e i v e r

1.Make sure the cables from the wall are connected to your cable and satellite boxes.

2.Connect a Composite A/V cable from the Audio/Video Output connectors on the satellite box to the Audio/Video Input 1 connectors on the Recorder.

3.Connect an RF Coaxial cable from the RF Out connector on the cable box to the RF IN connector on the Recorder.

4.Connect Composite A/V cables from the Audio/Video Output 1 connectors on the Recorder to the Audio/Video Input connectors on the TV.

5.Connect a phone line (page 8).

6. Connect the Serial Control cable. If your DIRECTV satellite receiver

 

has a 9-pin Data connector, plug one end of the Serial Control cable

Data

into the Data connector, and other end into the Channel Change/Serial

Connector

connector on the Recorder. Then skip to step 8.

 

If you don’t have a Data connector, see page 9 for Serial control alternatives. If you still can’t use a Serial connection or if you don’t have DIRECTV service, go to step 7.

7.Connect the IR Control cable. (a) Plug the purple end of the IR Control cable into the Channel Change/IR connector (the upper mini-jack) on the Recorder. (b) Locate your satellite and cable box’s IR sensors (see page 9). (c) Mount the IR emitters. Place one emitter on top of the cable box. If you connected the Serial Control cable in step 6, mount the other IR emitter underneath the cable box. If you didn’t connect the Serial Control cable in step 6, mount the other IR emitter on top of the satellite box. Be sure both emitters stick out about 1.5 inches directly in front of the IR sensors. (Use the provided adhesive strips to hold the emitters in place.)

8.Plug in all power cords and turn on your TV. If you don’t see the Welcome screen, you need to find the correct TV input setting. Press the Input, Source, or TV/Video button on your TV until you see the Welcome screen. For more help, see page 42.

9.Once you see the Welcome screen, the last step is to complete Guided Setup (see the User’s Guide for details). You must complete Guided Setup before you can play and record DVDs.

IR Control cable connection

7

3

Satellite Box

c

b

Cable Box

c

b

a

Recorder

®

The illustration above shows both

® the cable and satellite box using an

IR cable connection. For tips on the IR

Control cable connection, see page 10.

25

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Installation Guide Pioneer DVD Recorder with TiVo Compatibility of this unit with progressive-scan TVs Table of Contents Troubleshooting Getting Started FCC Note Federal Communications Rule A r C u s t o m e r Using This Guide Understanding the basicsFinding your setup example What’s next?Cables and Accessories These are the basicsChoosing audio and video cables Connecting to the Phone Line Using Your Recorder with a Cable or Satellite Box Serial/Data ControlIR Infrared Control Secure the material, making sure that it fits snugly T t i n g S t a r t e d Common Setup Examples Television Setup 1 Antenna or Cable No Cable BoxRecorder Before you beginT u p 1 a n t e n n a o r C a b l e N o C a b l e B o Setup 2 Cable Box or Satellite Receiver See , Connecting to a Home Network, in the User’s Guide M m o n S e t u p E x a m p l e s Additional Setup Examples Connecting a VCR or a Video CameraSetup 3 Watching One Channel While Recording Another Recorder TelevisionYou can also watch one channel Setup 4 Both a Satellite Box and an RF Program Source RecorderRecord DVDs Before you begin Upgrade to TiVo Plus Service is required. SetupsUpgrade Satellite Box Cable Box Recorder Cable or Satellite Box Data Connector Connection and for alternatives to Serial Control cable, see Connecting a VCR or a Video Camera To connect a VCR Before you beginTo connect a video camera not shown Setting Up the Remote Control Using the Remote with a TV and A/V Stereo System T t i n g U p t h e R e m o t e C o n t r o lInstructions Power, Volume, Mute, TV Input System Mute, and TV Power Volume InputTV input only System Mute, and TV Power Volume Input Performing a Code SearchTo Test T t i n g U p t h e R e m o t e C o n t r o l Managing Multiple Recorders and Remotes Resetting the Programmable Buttons Troubleshooting Customer Support TroubleshootingCustomer Support Use this chapterMy phone jack isn’t near the Recorder TroubleshootingWhy does the Recorder have to be connected to a phone line? Do I need to keep the phone connected all the time?Troubleshooting My Recorder remote control doesn’t work with my Recorder Troubleshooting Troubleshooting Troubleshooting Front and Back Panel Reference Front Panel Reference Back Panel ReferenceFront Panel Reference O n t P a n e l R e f e r e n c e P e n d i x a Back Panel Reference 12 14P e n d i x a C k P a n e l R e f e r e n c e P e n d i x a Index D e Page D e Specifications Troubleshooting
Top Page Image Contents