Turning Power On and Off

QIP2500 User Guide

BASIC OPERATION

Press POWER on the front panel to turn the set-top on or off. When using the remote control, be sure you press CABLE before pressing POWER.

Changing Channels

You can change channels in two ways:

•Press CHANNEL S or T on the front panel of the set-top, or press CHANNEL + or - on the remote control to step through the channel selection.

•Enter the number of the channel you wish to view using the number keys on the remote control.

Adjusting the Volume

Press VOLUME + or – on the remote control to adjust the volume. When you adjust the volume, the volume scale is displayed on the screen. Press MUTE on the remote control to turn the sound off and on again.

For best audio quality, use the remote control to set the set-top to approximately ¾ of the maximum volume level and then adjust the audio levels on external devices, such as your TV or A/V Receiver.

Electronic Program Guide

The electronic program guide (EPG) displays information about TV programs and enables you to access features such as Parental Control or Pay-Per-View. EPGs can vary in look and feel, depending on your service provider. Refer to the EPG instruction manual supplied by your service provider for detailed instructions.

Audio Output Modes

The QIP2500 includes utilities that enable you to select and adjust its DIGITAL AUDIO (coaxial or optical) or AUDIO OUT (RCA-style) outputs. If your EPG takes advantage of these utilities, it provides menu choices to select and optimize the audio output and compression modes. For more information about audio output mode configuration, refer to your EPG user manual.