Motorola QIP2500 Series manual There is no video on the TV screen

Page 27

QIP2500 User Guide

There is no video on the TV screen

Verify that the TV is powered on and set to the appropriate input source for the set-top.

Verify that the set-top is powered on and tuned to an authorized digital TV channel.

Verify that all video cables between the set-top and the TV are firmly connected (hand tighten if necessary).

Verify that the coaxial cable feed is firmly connected to the set-top and the wall jack.

If the set-top video output is connected to a home theater/digital receiver, verify that the receiver is powered on and set to the appropriate input source.

If you are watching TV using your VCR, be sure your VCR is on.

21

Image 27

Contents User Guide QIP2500 Series Set-Top Terminal Repairs Important Safety Instructions Regulatory Information Declaration of ConformityCanadian Compliance Software License Software LicenseContact Us QIP2500 User Guide Introduction Item Description Front PanelRear Panel QIP2500 User Guide Using the Remote Control Example only Electronic Program Guide Audio Output Modes Turning Power On and OffAdjusting the Volume Changing ChannelsAUDIO/VIDEO Connections Important Safety Considerations Recording Your Connections Standard TV Cabling Standard VCR Cabling Composite Video and S-Video Composite VCR Cabling Stereo Cabling VCR to Stereo Stereo Cabling TV to Stereo Baseband Cabling Dolby Digital Cabling Connectors do not carry Dolby DigitalTroubleshooting Page There is no video on the TV screen Mgbi